how to install corner cabinets

Mastering Cabinetry: Step-by-Step Guide to Install Corner Cabinets

By Robert Brown
AD

Installing corner cabinets can greatly enhance the functionality and aesthetic appeal of your kitchen or bathroom. These cabinets offer additional storage space and create a seamless, streamlined look in your room. Let's guide you through the process of installing corner cabinets with precision and ease.

Before you begin, ensure you have the right tools and materials. You'll need a drill, screwdriver, level, tape measure,tpl, a chisel (or a jigsaw for cutting openings), a hammer, and screws. Also, measure your walls and adjust your cabinet to fit the space.

Measuring for Corner Cabinets

Accurate measuring is crucial for a perfect fit. Start by measuring the width and height of your wall opening. Subtract 1/4" from the width and 1/2" from the height to account for shimming and leveling. This measurement will give you the size of the hole you need to cut on the wall.

AD
DIY Corner Wall Cabinets: How to Build Kitchen Corner Cabinets and Maximize Storage
DIY Corner Wall Cabinets: How to Build Kitchen Corner Cabinets and Maximize Storage
a woman kneeling down in front of a cabinet with the words how to build a blind corner cabinet
a woman kneeling down in front of a cabinet with the words how to build a blind corner cabinet
DIY corner cabinet with NO wasted space! - Sawdust Girl®
DIY corner cabinet with NO wasted space! - Sawdust Girl®

Next, measure the diagonals of the corner where your cabinet will be placed. The diagonals should be equal for a perfect fit. If they're not, you might need to square off the corner with a jigsaw before proceeding.

Cutting the Opening

Using a drill and drill bit that matches the size of your jigsaw blade, drill multiple holes along the lines marking your opening. This will give you a starting point for your jigsaw.

How to Build Corner Cabinets
How to Build Corner Cabinets
How to Organize Corner Cabinets (The $15 Fix That Changed Everything)
How to Organize Corner Cabinets (The $15 Fix That Changed Everything)

Carefully and slowly cut along the lines using your jigsaw. Make sure to wear protective gear, including safety glasses and gloves. Once you've cut out the panel, remove it and set it aside. This will be your access panel to route plumbing or electrical lines if needed.

Preparing the Cabinet

Assemble your cabinet according to the manufacturer's instructions. Make sure all doors and drawers are functioning properly before installation.

AD

Now, measure and mark the top and bottom of your cabinet to indicate where it should meet the wall. Also, mark where you want your backstud to be. This will help you ensure your cabinet is square and level.

Installing the Cabinet

Start by installing a backstud on the wall inside the opening you've cut. This will provide support and stability for your cabinet. Use a level to ensure the backstud is plumb, then secure it in place with screws.

Next, place your assembled cabinet into the opening. Use a level to ensure it's plumb and check that it's square using the measurements you made earlier. Once you're satisfied with its position, secure it to the backstud and the wall using screws.

AD

Securing the Cabinet

Once your cabinet is secure, you can add shims behind it if necessary to level it out. Use screws to secure the shims in place.

Now, reattach the access panel you removed earlier. If you routed any plumbing or electrical lines, make sure they're properly connected and functioning before sealing the panel.

Finishing Touches

Braun Cabinetry, water faucets, and other hardware like knobs or pulls. Make sure everything is functioning properly and that your doors and drawers are opening and closing smoothly.

AD

Finally, give your new corner cabinets a good cleaning to remove any dust or debris from installation. Your new cabinets are now ready to enhance your kitchen or bathroom's functionality and aesthetics!

AD