how to install coaxial cable

How to Install Coaxial Cable: A Step-by-Step Guide

By Joseph Lewis
AD

Looking to improve your home's connectivity by installing coaxial cable? You're in the right place. Also known as coax cable, it's a reliable option for high-speed internet, cable TV, and phone connections. This comprehensive guide will walk you through the process, from gathering tools to testing your final setup.

Before we dive in, let's clarify who this guide is for. If you're a DIY enthusiast comfortable with basic hand tools and have a moderate understanding of electrical concepts, you're good to go. But if you're unsure, it's always best to consult a professional. Safety first, right?

Gathering Tools and Materials

First, let's get your toolkit and materials ready.

AD
The Best Tips for Wiring With Coaxial Cable
The Best Tips for Wiring With Coaxial Cable
How to Prep Coaxial Cable and Install a Compression Connector (Jonard CT-200G)
How to Prep Coaxial Cable and Install a Compression Connector (Jonard CT-200G)
How To Install Communication Wiring and Cables In a Wall
How To Install Communication Wiring and Cables In a Wall

tools

  • Coaxial cable (ensure it's the right type for your needs)
  • Cable install tools (coax compression connectors, compression tool, cable strippers)
  • Fish tape or cableulgator
  • Screwdrivers (flat and Phillips head)
  • Tape measure
  • Drill (if walls need to be drilled)
  • Stud finder (if walls need to be drilled)

Materials

Top Tips for Coaxial Cable Wiring
Top Tips for Coaxial Cable Wiring
How do I properly feed coax through an outside wall?
How do I properly feed coax through an outside wall?
  • Wall plates (for wall mounting)
  • Optional: RG-6 or RG-11 coax for longer runs

Choosing the Right Coaxial Cable

When selecting your cable, consider the following:

  • Cable type: RG-6 is standard for most homes, but RG-11 is better for longer runs or high-speed data.
  • Cable quality: Opt for high-quality, quad-shielded cables for better performance.
  • Cable color: Colors doesn't matter much, but consistency helps in troubleshooting.

Planning Your Coax Cable Run

Measure your cable runs accurately. Add a few extra feet for flexibility and ease of installation. Consider where you'll mount your wall plates and plan your cable path accordingly. Avoid sharp bends, and keep cables away from heat sources and heavy electrical currents.

AD

Installing Coaxial Cable

Now that you're all set, let's install your coax cable.

Before you start, ensure your work area is well-lit and safe. Turn off power to any electrical outlets or devices near your cable run.

Preparing the Cable

strip the cable’s jacket (outer covering) with your cable stripper, exposing the braided shield and inner conductor.Strip about 1 to 1.5 inches from each end.

AD

unwrap the braided shield, and trim it flush with the jacket. You'll terminate this later.

Terminating the Cable

Choose the appropriate connector, commonly a F-connector, for your coax cable. Using your compression tool, firmly compress the connector onto the exposed cable end.

Pro tip: Avoid over-compressing connectors, as this can damage the cable and affect signal quality.

AD

Running the Cable

Using your fish tape or cableulgator, feed the cable through the planned route. Be gentle to avoid damaging the cable's inner conductor.

Once the cable is through, gently pull it back until you have a few feet extra on both ends.

Mounting Wall Plates and Connectors

Mark the positions for your wall plates using a stud finder for secure mounting. Drill holes if needed, then attach the wall plates.

Feed the terminated cables through the wall plates and tighten the connectors. Ensure they're securely fastened and not too loose or too tight.

Connecting Devices and Testing

Now, let's connect your devices and test your new coax cable installation.

Note: Before connecting devices, ensure the devices are compatible with the cable and connectors you've used.

Connecting Your Devices

fork the terminated cable into your modem or splitter, then connect other devices like DVRs, settop boxes, or cable modems.

Testing Your Connection

turn on your devices and check for signals. If you're using cable TV, look for channels. For internet, try loading websites or performing a speed test.

If you encounter issues, retrace your steps, check all connections, and ensure no cables were damaged during installation.

Congratulations! You've successfully installed coaxial cable. Enjoy your improved connectivity. And remember, if you ever feel unsure, it's always best to consult a professional electrician.

AD