MasteringCliplessPedals: Step-by-Step CLI Installation Guide
Are you ready to upgrade your cycling experience? Installing clipless pedals can significantly improve your efficiency, power, and control on the bike. This guide will walk you through the process, from selecting the right pedals to changing out your old ones and cliping in for the first time.
Before we dive in, let's quickly outline what you'll need: a pedal wrench (usually 15mm), your new clipless pedals, pedaling cleats, and, of course, your bike. You might also want to have some grease on hand for a smooth pedal installation.
Choosing & Preparing Clipless Pedals
If you're new to clipless pedals, the two most common types are LOOK Delta and SPD (Shimano Pedaling Dynamics). Both have their pros and cons, so it's essential to choose the one that best suits your riding style and preferences. Once you've decided on the type, make sure to get the matching cleats to ensure a secure connection.
Before installation, check the pedal axle length to ensure they're compatible with your bike. Most road bikes use a standard 9/16" axle, but some cyclocross and mountain bikes might require a 1/2" axle, so be sure to double-check.
Thread Direction
Pedals typically come with a right-hand thread (RHT) for the left pedal and a left-hand thread (LHT) for the right. The thread direction is marked on the pedal body - usually with an 'R' or 'L' - to help you install them correctly.
It's essential to follow the proper thread direction to avoid cross-threading, which can damage your crank arm. If you're unsure, align the pedal so the crank arm lies in line with the pedal spindle. The pedal should look like it's pointing straight back when installed correctly.
Greasing the Pedal Interface
Applying grease to the pedal threads before installation can help reduce wear and tear, making it easier to remove the pedals in the future. Aim for a thin, even layer of grease, being careful not to over-oil as this could attract dirt and debris.
Many modern pedals come with a cartridge bearing system, which includes a pre-applied layer of grease. If this is the case, there's no need to add additional grease, as it could push the existing grease out and leave the bearing system vulnerable to contamination.
Removing Your Old Pedals
Before installing your new clipless pedals, you'll need to remove your existing ones. Start by ensuring your bike is securely upright using a bike stand or asking a friend to hold the bike. This will prevent any accidents and make the process more comfortable.
Locate the pedals' axle nuts - these are usually tightened with a 15mm pedal wrench. Hold the pedal itself with one hand to prevent it from spinning while you loosen the nut with the other. Gently work the nut counterclockwise until it's completely loose, then remove the washer and set them aside.
Checking the Crank Arm Thread
Once you've removed the axle nut and washer from both pedals, inspect the crank arm thread for any signs of damage or wear. If the thread is stripped or damaged, you may need to replace the entire crank arm before installing new pedals.
If the thread appears intact, proceed with caution when installing your new pedals to avoid cross-threading and potential damage to the crank arm.
Installing the New Pedals
Now that you've removed your old pedals and checked the crank arm threads, it's time to install your new clipless pedals. Start with the left pedal, which uses a right-hand thread (RHT). Align the pedal spindle with the crank arm, then carefully thread the pedal onto the crank arm by hand, turning it clockwise.
Once the pedal is securely seated, use your pedal wrench to tighten the pedal axle nut. Tighten it firmly, but be careful not to overtighten, as this could strip the crank arm thread or damage the pedal itself. Aim for around 35-40 Nm of torque, which is roughly equivalent to the resistance you'd feel pulling on the end of a ruler that's 10-12 inches long.
Repeat the process for the right pedal, using a left-hand thread (LHT) and ensuring it's facing the correct direction. Once both pedals are installed and tightened, perform a quick spin check to ensure they both rotate smoothly and aren't binding.
Fitting the Cleats
With your pedals securely installed, it's time to fit your cleats. Start by identifying the cleat's centerline, which should be aligned with the ball of your foot. Slide the cleat onto the pedal's clipless mechanism, ensuring the cleat is fully seated and the retention screws are securely tightened.
For your first few rides, it's a good idea to tighten the retention screws slightly more than you normally would. This extra tension will help hold your foot in place as you get used to clipping in and out. As you become more comfortable, you can gradually loosen the screws to your preferred tension.
Practicing & Fine-Tuning
Before hitting the open road, practice clipping in and out in a safe, controlled environment. Start by placing your foot on the pedal, finding the cleat mechanism, and pushing down to engage. To release, twist your heel out to the side - never try to pull your foot straight up, as this could cause a fall.
As you become more confident, pay attention to your technique and make adjustments as needed. Many cyclists prefer to practice in front of a mirror or have a friend watch them to help identify any inefficiencies in their clipping technique. With time and practice, you'll master the art of clipless pedals and enjoy the enhanced performance they bring to your rides.
Congratulations! You've successfully installed and fitted your new clipless pedals. As you embark on your next cycling adventure, remember to take it slow at first and enjoy the process of building your skills and confidence. Bon voyage!