how to install blink doorbell

Step-by-Step Guide: How to Install Blink Doorbell

By John White
AD

Are you ready to upgrade your home's doorbell to a modern, connected device? The Blink Video Doorbell is a fantastic choice, offering HD video, two-way audio, and motion detection to keep your home secure. Here's a comprehensive guide on how to install your Blink Doorbell, ensuring a seamless setup that's perfect for DIY enthusiasts and tech novices alike.

Before you start, make sure you have all the necessary tools: a ladder, screwdriver, drill (if needed), drill bit, wire stripper, wire connector, and electrical tape. You'll also need the Blink app installed on your mobile device.

Preparation and Wiring

The first step is to prepare your Blink Doorbell and install it temporarily to check its range and location. Remove the protective film from the device and insert the rechargeable battery, ensuring it's properly aligned and clicks into place.

AD
How To Install Blink Doorbell
How To Install Blink Doorbell
How to Install Ring Doorbell on Brick without Drilling?
How to Install Ring Doorbell on Brick without Drilling?
an image of a door with the text how to install blink dobrell on it
an image of a door with the text how to install blink dobrell on it

Next, ENUSURE YOUR DOORBELLChime is compatible with the Blink Doorbell. east wiring options, but the most common is the provided wiring harness. Connect the provided wires to your doorbell chime, using the color coding as a guide: green to green, black to black, and white to white. Once connected, test the doorbell both at the front door and inside your home.

Mounting Options

Now that your Blink Doorbell is working, let's discuss mounting options. The Blink Doorbell can be installed using either screws or adhesivemounts. If you prefer screws, drill holes into the wall at the two mounting points, ensuring they align with the mounting template or the device itself. If using adhesive mounts, ensure your wall surface is clean, dry, and free of grease or contaminants.

How to install blink doorbell on brick without drilling
How to install blink doorbell on brick without drilling
How to Install & Set Up a Blink Video Doorbell
How to Install & Set Up a Blink Video Doorbell

Safety first: always turn off power to your doorbell chime at the circuit breaker before beginning any wiring or installation work.

Powering Up Your Blink Doorbell

Once you've determined the perfect location, it's time to power up your Blink Doorbell. You have two options: battery power only or hardwired with battery backup. To hardwire, connect the wires from your doorbell chime to the provided power kit, ensuring the polarities are correct ( positive to positive, negative to negative). Attach the power kit to the back of your Blink Doorbell.

AD

The battery provides backup power in case of a power outage or if you prefer wireless functionality. Make sure to charge the battery before installation and insert it into the device securely.

Connecting to Wi-Fi and Syncing with the Blink App

Now that your Blink Doorbell is powered up, it's time to connect it to your Wi-Fi network. Place the device in Sync Mode by pressing and holding the sync button on the front of the device until the status LED blinks rapidly. Open the Blink app and tap 'Add Device'. Select 'Doorbell' and follow the on-screen instructions to connect your device to your Wi-Fi network.

Once connected, follow the instructions in the Blink app to sync your Blink Doorbell with your Blink account. If you don't have one, create an account during the setup process. After syncing, mount your Blink Doorbell at the location you chose earlier.

AD

Customizing Settings and Motion Detection Zones

With your Blink Doorbell mounted and connected, it's time to customize your settings. Open the Blink app and tap on your Blink Doorbell. Here, you can enable motion detection and adjust your motion detection zones. You can also set up notifications, change your video and audio settings, and enable features like two-way audio and live view.

You can also set up routines in the Blink app, allowing your Blink Doorbell to interact with other connected devices. For example, you can set your smart lights to turn on when motion is detected or when the doorbell is pressed.

Testing Your Blink Doorbell

Before you finalize your installation, test your Blink Doorbell to ensure everything is working correctly. Press the doorbell button at your front door and check if you're receiving notifications on your mobile device. If enabled, check if the LED on your Blink Doorbell is illuminated when motion is detected.

AD

With your Blink Doorbell tested and configured, you can sit back and enjoy the peace of mind that comes with a modern, connected doorbell system.

Remember to keep your Blink Doorbell clean and dry, and charge the battery regularly to ensure optimal performance. As with any electronic device, avoid exposing your Blink Doorbell to extreme temperatures or weather conditions. And that's it – you're now the proud owner of a top-notch doorbell system that's ready to keep your home secure and connected.

AD