How to Install Badger 100 Garbage Disposal
Installing a badger 100 garbage disposal can modernityize your kitchen and reduce your carbon footprint by composting food waste. Here's a step-by-step guide to help you through the process.
Before you begin, ensure you have the necessary tools and parts. You'll need a Badger 100 disposal, a screwdriver, adjustable wrenches, a hacksaw, Teflon tape, and plumber's putty. It's also a good idea to have aublished plumbing diagram of your kitchen sink on hand.
Preparation and Old Disposal Removal
The first step is to prepare your workspace and remove the old disposal, if you have one. Place a bucket underneath the P-trap to catch any residual water. Disconnect the power cord, unscrew the mounting bolts, and lift the old disposal out.
Clean the area and ensure all parts are accounted for. If you're replacing an old disposal, double-check that the Badger 100's dimensions fit your cabinet space.
Dishwasher Connection
If you have a dishwasher, connect the new Badger 100 to it. First, ensure the disposal's dishwasher stud is aligned with the dishwasher's impeller. Tighten the clamp and secure the connection with a nut. Ensure the nut is loose enough to allow for thick dishwasher drain lines.
Then, verify that the dishwasher can still drain normally. If not, loosen the nut and reposition the disposal. Tighten the nut securely once the dishwasher is draining properly.
Water and Drain Pipes Installation
Connect one end of your supply tube to the disposal's water inlet. Use Teflon tape to create a watertight seal, wrapping it three times around the threads. Then, screw on the tube, turning it clockwise until it's snug.
Secure the drain hose to the disposal's outlet. Apply plumber's putty to the lip of the outlet, then slide the hose onto the outlet. Tighten the hose clamp and ensure the hose isn't leaking.
Mounting the Badger 100
Slide the mounting bracket into the mounting ring. Use the screwdriver to pivot the bracket up and down, aligning it with the disposal's openings. Once aligned, tighten the bracket screws securely.
Place the disposal into the mounting bracket. Ensure the impellers face the correct direction (check the disposal's user manual). Reach under the sink to tighten the mounting screws securely.
Electrical Connection
Connect the power cord to the disposal's electrical scrape ring. Ensure the power cord is wrapped securely around the ring, then tighten it with a setscrew. If your disposal came with a cord strain relief, install it now to prevent excessive cord movement.
Connect the other end of the power cord to your electrical outlet or junction box. If you're using a junction box, ensure it's properly installed and up to code. Always double-check electrical connections for any wear or damage.
Testing the Badger 100
Before you flush water through your new disposal, test the electrical connection. Reset your circuit breaker, then plug in an electrical device. If the device works, your disposal's electrical connection is correct.
Next, turn on the disposal (always run cold water with it) and drop a few ice cubes down the drain. The disposal should grind the ice cubes. Slowly introduce larger items like food waste to test its functionality.
Congratulations! You've successfully installed your Badger 100 garbage disposal. Regularly maintain it by running cold water and disposing of non-food items in the trash to keep it running smoothly. If you encounter any issues, consult the user manual or contact a professional plumber.