how to install avs rain guards

Mastering AVS Rain Guards: Easy DIY Installation

By Daniel Walker
AD

Embracing the unpredictable nature of rain is part of life, but not when it comes to your car. AVS rain guards offer a practical solution, keeping your vehicle's paint shielded from rain, snow, and hail. Installing them is a straightforward process, and this comprehensive guide will walk you through every step.

Before you start, gather your AVS rain guards, a squeegee or a soft cloth for cleaning, a Phillips screwdriver, and a marker. This guide assumes you're working with a sedan. The process is slightly different for hatchbacks and SUVs.

Preparation and Cleaning

Thorough preparation is key to a successful installation. Start by cleaning the area where the rain guards will be attached.

AD
How To Install Rain Guards On Car Windows – Storables
How To Install Rain Guards On Car Windows – Storables
Wind & Rain Guards, Removal and Installation
Wind & Rain Guards, Removal and Installation
How To Install Window Visor on Mercedes ML550 | Deflector Rain Guard on W164
How To Install Window Visor on Mercedes ML550 | Deflector Rain Guard on W164

Use a mild detergent and water to clean the door edges and ensure there's no wax or grease. Allow the area to dry completely to avoid creating a barrier between the rain guard and the car's surface.

Understanding the Rain Guards

AVS rain guards typically come in pairs, designed to fit most vehicle models. Each guard consists of a main body and a rubber edge for attachment.

How to remove adhesives (rain guards)
How to remove adhesives (rain guards)
In-Channel Rain Guards Vs. Stick-On: 3 Key Differences
In-Channel Rain Guards Vs. Stick-On: 3 Key Differences

They are designed to be installed two inches above the door line. This provides adequate coverage while keeping the guards in a subtle position, blending with your vehicle's design.

Preparation of Rain Guards

Before installation, ensure the rain guards are fully expanded. Remove the protective film from the attachment strip.

AD

With the guards fully opened, lay them on a flat surface and apply gentle pressure to the edges to ensure a smooth finish and lock the guard into position.

Installation: Upper Part

Installing the top part first ensures a better alignment for the bottom portion.

Starting from the roof, position the rain guard two inches from the top edge of the door. Mark this position with a marker. This will serve as your reference for installation.

AD

Attachment to the Roof

Bring the marked rain guard to the roof and position it according to the mark. Use the included screws to secure the guard to the roof. Ensure the guard is level and not wonky.

Tighten the screws gently, using a Phillips screwdriver. Be careful not to overtighten and damage the rain guard or the car's paint.

Attaching to the Door Edge

Once the top of the rain guard is secured, unfold the guard towards the door. Align the rain guard with the door edge, ensuring it doesn't extend beyond the door's width.

AD

Fold the rain guard slightly and apply firm pressure along the edge to create an airtight seal with the car's surface. This ensures a tight fit and prevents water from seeping in.

Installation: Lower Part

The lower part of the rain guard follows similar steps, but with additional care to ensure it doesn't interfere with the door's opening mechanism.

Position the lower part of the rain guard two inches from the bottom edge of the door. Mark this position and, using this mark, attach the guard to the door using the provided screws.

Center Pillar Installation

Some vehicles, like coupes, may require an additional center pillar rain guard. Install this similarly, ensuring it aligns with the existing rain guards and doesn't interfere with the door's opening or any other car components.

When installing, ensure you maintain a consistent two-inch distance from the top and bottom edges, and align the guard with the existing ones for a seamless look.

Finishing Up

Once all the rain guards are installed, stand back and admire your work. Ensure all screws are secure, and the rain guards are snug against the car's surface.

Give your vehicle a final clean to remove any remaining marks from the installation process.

And there you have it! Your AVS rain guards are now installed and ready to protect your car from the elements. Regularly inspect them before rain to ensure they're in good working condition. Enjoy your newly safeguarded vehicle!

AD