How to Install an Outside Spigot: Step-by-Step Guide
Installing an outside spigot, also known as an outdoor faucet, is a practical skill that can save you from hiring a plumber and even enhance your home's exterior aesthetics. This guide will walk you through the process step by step, ensuring you understand how to install an outside spigot securely and efficiently.
Before Starting, Gather Your Tools and Materials: To set yourself up for success, ensure you have the right tools and materials. You will need a tape measure, pencil, hacksaw, adjustable wrench, Teflon tape, pipe cement, outdoor spigot, string or chalk line, and a sawzall or reciprocating saw. Also, make sure to have a new, high-quality spigot that suits your home's exterior and water needs.
Preparation and Planning
Measure and Mark: Begin by measuring the height from the ground where you want your spigot to be. Mark this point on the wall with a pencil.
Turn Off the Water Supply: To prevent water leaks and flooding, shut off the internal water supply valve connected to your outdoor faucet location. You can usually find this valve in your basement or utility closet. If you're unsure of its location, consider hiring a professional plumber.
Removing the Existing Spigot (if applicable)
If you have an old spigot in place, it's time to remove it. Using an adjustable wrench, slowly loosen and remove the coupling nut connecting the spigot to the water supply pipe.
Next, use a hacksaw to cut through the supply pipe behind the spigot. Remember to maintain a slight angle while cutting, as this will help you create a clean, beveled edge. After cutting, remove the old spigot completely, and set it aside.
Installing the New Spigot
Shut off the exterior water supply valve, usually located near the house foundation. If your home doesn't have one, you may need to install it during this process. Once the valve is closed, cut the water supply pipe to the desired length, ensuring it's long enough to accommodate your new spigot.
Wrap the ends of the cut pipe with Teflon tape to create a watertight seal. Apply pipe cement over the tape, ensuring both male and female threads are thoroughly covered. Carefully screw the new spigot onto the pipe, using pliers or channel locks to tighten it securely. Ensure you don't overtighten, as this can strip the threads or cause leaks.
Outdoor Spigot Maintenance and Care
Once installed, it's essential to care for your outdoor spigot to extend its lifespan and prevent leaks. Periodically check for leaks, rust, or damage, and address any issues promptly.
Preventing Freeze Damage
If you live in an area with freezing temperatures, wrap your spigot and any exposed water pipes with heat tape during winter months. This will help prevent your pipes from freezing and bursting, which can cause costly damage.
Winterizing Your Spigot: Before the cold season, shut off the interior water supply valve and open the spigot to drain any remaining water. This will prevent frozen pipes and help maintain your spigot's functionality.
Congratulations! You've successfully learned how to install an outside spigot and ensure its longevity. By following these steps and maintaining your spigot regularly, you'll enjoy a reliable outdoor water source for years to come.