how to install above ground pool skimmer

How to Install Above Ground Pool Skimmer

By Joseph Martin
AD

Are you tired of constantly cleaning debris from your above ground pool? An effective way to manage this is by installing an above ground pool skimmer. This handy device catches leaves, dirt, and other debris before they enter your pool's pump and filter system, making your pool maintenance significantly easier. So, let's dive into the step-by-step guide on how to install an above ground pool skimmer.

Before we start, ensure you have all the necessary tools and equipment. You'll typically need a skimmer kit, a drill, a tape measure, a marker, screws, a screwdriver, a saw (hand or jigsaw), and safety glasses. Also, make sure you have the correct skimmer kit for your pool type and wall material.

Understanding Your Skimmer Kit and Pool

Familiarize yourself with the skimmer kit components. Generally, it includes the skimmer body, faceplate, weir, skimmer light (if applicable), screw-on or pop-up threaded fitting, gaskets, and screws. Understand your pool's dimensions and wall type (resin or metal).

AD
How to INSTALL SKIMMER on ABOVE GROUND POOL - Bestway, Coleman, Intex, more!
How to INSTALL SKIMMER on ABOVE GROUND POOL - Bestway, Coleman, Intex, more!
How to add a skimmer to your above ground swimming pool in 7 easy steps!
How to add a skimmer to your above ground swimming pool in 7 easy steps!
Pool Skimmer
Pool Skimmer

pools have a specific skimmer line location, usually around 1.5 feet from the top beaded ledge of the pool wall. Mark this line with a marker on the outside of your pool wall to guide your installation process.

Choosing the Right Location for the Skimmer

Find a spot on your pool wall where the skimmer will not be in the way of benches, steps, or other features. It should also be near your pool's plumbing line for easy access to your filter system. Finally, ensure it's not located in an area where excess debris tends to accumulate, like near trees or algae-prone spots.

At Home Recreation- How to Install your Above Ground Pool Skimmer
At Home Recreation- How to Install your Above Ground Pool Skimmer
BIG UPGRADE: Pool Skimmer Install on Intex Above Ground Pool | Hayward SP1091LX Dyna-Skim
BIG UPGRADE: Pool Skimmer Install on Intex Above Ground Pool | Hayward SP1091LX Dyna-Skim

Once you've decided on the perfect spot, trace the skimmer outline onto your pool wall using the provided template or by measuring 18-24 inches wide and 12-14 inches tall for most standard skimmers.

Cutting the Hole for the Skimmer

Use a saw to carefully cut along themarked lines. Ensure the cut is smooth to avoid sharp edges that could damage your skimmer or cause injury. For metal walls, use a metal-cutting blade for your saw. For vinyl pools, you may need to drill pilot holes first before cutting.

AD

Once you've cut the hole, clean up any rough edges and ensure the opening is slightly smaller than the skimmer body to create a tight seal. If necessary, use a file to smooth out any rough spots.

Installing the Skimmer

With the hole ready, it's time to install the skimmer. Start by visiting the inside of your pool to ensure the skimmer light (if included) or faceplate aligns with the exterior hole.

First, apply a bead of silicone sealant around the interior of the hole to create a waterproof seal. Then, from the outside, place the skimmer body into the hole, ensuring it's level and plumb.

AD

Attaching the Skimmer Weir

The weir is the part of the skimmer that determines the water level in your pool. Attach it to the skimmer body using the screws provided. Ensure it's fastened securely but not so tight that it warps the weir.

Most skimmers come with a pre-set weir height. If you need to adjust it to achieve your desired water level, you can do so by bending the weir slightly. Just be careful not to bend it too much, as this can cause it to break.

Connecting the Skimmer to Your Plumbing

If you're replacing an existing skimmer, use the threaded fitting to connect the new skimmer to your existing plumbing. If you're installing a new skimmer, you'll need to connect it to your pool's filter system. This typically involves cutting into the PVC pipe and connecting it to the skimmer's threaded fitting using PVC cement and primer.

AD

Ensure all connections are tight and secure to prevent leaks. Use teflon tape on the threads to ensure a watertight seal. Once connected, turn on the pool pump to test the skimmer and ensure it's working correctly.

Final Touches and Maintenance

Once the skimmer is installed and functional, attach the faceplate (or skimmer light) from the inside of the pool. Ensure it's level and secured with screws.

For maintenance, regularly clean the skimmer basket (usually every week during normal pool use and more frequently during heavy use or inclement weather). Rinse and replace the basket as needed. Additionally, check the skimmer's weir occasionally to ensure it's not obstructed and allowing proper water flow.

There you have it! Your above ground pool skimmer is now successfully installed, saving you time and effort in maintaining your pool's cleanliness. Regular maintenance and proper use of your pool skimmer will ensure it continues to function efficiently for years to come.

AD