How to Install a Widebody Kit
Installing a widebody kit on your vehicle can significantly enhance its appearance and performance. This comprehensive guide will walk you through the process, ensuring you understand each step and its importance. Remember, patience and precision are key when working on your vehicle.
Before you start, gather all the necessary tools and materials. This includes a widebody kit, coilovers, fender BT Johnny Joints, cutting tools, bondo, body filler, sanding tools, body primer, painting supplies, and, of course, safety equipment like gloves and safety glasses.
Preparation and Measuring
Begin by thoroughly cleaning your vehicle to ensure you're working on a smooth surface. Measure the width of your current fenders and then decide on the width you want to achieve. This will help you understand how much material you need to remove or add.
Next, measure the bolt pattern on your wheels and ensure they will fit with your new fenders. If not, you may need to adjust the bolt pattern or purchase new wheels.
Removing Stock Fenders
Use cutting tools to carefully remove the stock fenders. If the kit includes new fenders, use these as a template. Ensure you cut along the lines and don't damage the vehicle's body.
If your kit doesn't include new fenders, you'll need to create them. Use the measurements you took earlier to mark the new fender lines. Cut along these lines, ensuring you maintain a consistent gap between the new fender and tire.
Modifying the Widebody Kit
Check if the widebody kit fits perfectly. If it doesn't, you may need to modify it. Carefully sand down areas that are too large, or use bondo and body filler to build up areas that are too small.
Once you've modified the kit, apply body primer to the area. This will help you spot any imperfections. Sand the area again, and apply more primer if necessary. Repeat this process until the surface is smooth and ready for painting.
Installing the Widebody Kit
Before you install the kit, apply painting supplies to achieve your desired color and finish. Allow the paint to dry completely.
Now, it's time to install the kit. Position the new fenders where you removed the stock ones. Ensure they're aligned properly, then mark the mounting points. Drill holes at these points, ensuring you don't drill into any existing holes in the vehicle's body.
Attaching the Widebody Kit
Use bolts or rivets to attach the kit to the vehicle. Ensure they're tight enough to hold the kit in place, but not so tight that they warp the metal. If the kit includes new BT Johnny Joints, attach these now following the manufacturer's instructions.
Once the kit is attached, installed coilovers to lower your vehicle's center of gravity. This will help ensure your new widebody kit sits perfectly on your vehicle.
Fine-Tuning and Details
After everything is installed, check for any imperfections and make final adjustments if necessary. Ensure the kit is aligned properly and that there's a consistent gap between the tire and fender.
Finally, take your vehicle for a test drive to ensure everything is functioning correctly. Check for any squeaks, rattles, or unusual noises. If everything is functioning as it should, your widebody kit installation is complete!
Installing a widebody kit can be a challenging yet rewarding process. By following this guide and taking your time, you'll achieve an impressive, distinctive look for your vehicle. Happy installing!