how to install a sharkbite shut off valve

Mastering SharkBite: Step-by-Step Guide to Installing SharkBite Shut-off Valve

By Melissa Hernandez
AD

Ever found yourself in a plumbing emergency, wishing you could turn off the water supply quickly and easily? SharkBite shut off valves are designed to solve this very issue, offering a simple, push-to-connect solution. In this comprehensive guide, we'll walk you through the process of installing a SharkBite shut off valve, ensuring you're prepared for any plumbing mishaps.

First things first, understanding what a SharkBite valve is and why it's a game-changer. SharkBite valves use Copper Crimp Technology (CCT) or Push-to-Connect Technology (PCT), allowing for quick and easy installation without soldering. They're versatile, too, accommodating both PEX and copper pipe materials. Now, let's dive into the installation process.

Preparation: Tools and Materials Needed

Before you begin, gather your tools and materials. You'll need:

AD
How to install and remove a Sharkbite shut off valve
How to install and remove a Sharkbite shut off valve
How to Install a Shark Bite Shut Off Valve in a Bathroom (Step-by-Step) -- by Home Repair Tutor
How to Install a Shark Bite Shut Off Valve in a Bathroom (Step-by-Step) -- by Home Repair Tutor
Leaky Stop Valve. Installed Shark Bite Ball Stop Valve. DIY.
Leaky Stop Valve. Installed Shark Bite Ball Stop Valve. DIY.
  • A SharkBite shut off valve, preferably in the size that matches your pipe's diameter
  • Pipe cutter or hacksaw
  • Teflon tape or pipe dope
  • Crimping tool (if using CCT)
  • Adjustable wrench
  • Pipe brush (optional, for cleaning the pipe)

Safety first! Always turn off the water main before working on your plumbing. It's also a good idea to have a bucket handy to catch any residual water.

Measure and Mark the Installation Point

Start by determining where you want to install the shut off valve. It's typically placed near the appliances it will control, such as a sink or washing machine. Measure and mark the spot on your pipe using a marker or tape.

Installing A Water Shut Off Valve | Easy Sharkbite Install
Installing A Water Shut Off Valve | Easy Sharkbite Install
How to Add a SharkBite Slip Ball Shutoff Valve to a Water Line; Copper or PEX DIY plumbing project
How to Add a SharkBite Slip Ball Shutoff Valve to a Water Line; Copper or PEX DIY plumbing project

To ensure the valve is installed at the right height, consider the size of your valve and the amount of space you need to work. It's better to install it a bit lower than you might need, as you can always raise it slightly with tee fittings if necessary.

Cut the Pipe

Using your pipe cutter or hacksaw, carefully cut the pipe at the marked point. Be sure to wear safety glasses to protect from metal shavings. Once cut, deburr the ends of the pipe using a deburring tool or sandpaper to ensure smooth edges.

AD

If your pipe is made of PEX, you can use a PEX tube cutter for clean, smooth cuts. Remember, PEX should be cut perpendicular to its length and at a 45-degree angle.

Installing the SharkBite Valve

With your pipe cut, it's time to install the SharkBite valve. The process is slightly different depending on whether you're using a CCT or PCT valve.

First, insert one end of the pipe into the valve's fitting. If using a PCT valve, simply push the pipe firmly into the fitting until it clicks into place. If using a CCT valve, insert the pipe, then use the crimping tool to compress the fitting onto the pipe.

AD

Apply Pipe Dope or Teflon Tape

Before connecting the other end of the pipe, apply a thin layer of pipe dope or Teflon tape to the pipe's outer threading. This helps create a watertight seal and prevents leaks. Be sure to wrap the tape in a clockwise direction, following the horseshoe shape.

If you're connecting to a copper fitting, you can use the same pipe dope or Teflon tape. However, if you're connecting to another PEX pipe, avoid using Teflon tape, as it can damage the PEX. Instead, use a PEX connector and appropriate primer and cement.

Connect the Other End of the Pipe

Now, connect the other end of the pipe to the valve's output. If you're connecting to a copper fitting, use an adjustable wrench to tighten the fitting securely. For PEX, follow the manufacturer's instructions for their specific connector system.

AD

Once connected, open the valve fully to check for any leaks. If everything is secure, you can turn the water supply back on and test the valve by opening and closing it a few times.

Final Touches

After the initial test, ensure the valve is in the 'off' position and wrap it in insulation to protect it from extreme temperatures. This also helps to reduce condensation and corrosion.

Regularly check your SharkBite valve, especially after installation. If you notice any water dripping or hear a hissing sound when the valve is closed, tighten the fittings or replace the valve if necessary.

That's it! You've successfully installed a SharkBite shut off valve, giving you peace of mind and quick control over your water supply. Happy plumbing!

AD