how to install a pickup into an acoustic guitar

How to Install a Pickup in an Acoustic Guitar: A Step-by-Step Guide

By Michael White
AD

If you're eager to upgrade your acoustic guitar's sound, installing a pickup may be just the project you're looking for. A pickup allows you to amplify your acoustic, opening up new playing possibilities, from solo performances to band rehearsals and gigs. Let's guide you through the process, ensuring your guitar's tonal integrity.

Before we start, remember that this process requires some DIY skills, patience, and the right equipment. If you're unsure at any point, don't hesitate to consult a professional guitar technician. Let's dive into the world of acoustic guitar pickups.

Types of Acoustic Guitar Pickups

Before you start, it's crucial to understand the different types of acoustic guitar pickups available. Each type captures the guitar's sound differently, affecting its tone:

AD
Yes, Beginners Can Install Guitar Pickups
Yes, Beginners Can Install Guitar Pickups
How to fit a piezo pickup and preamp into an acoustic guitar. The LC-5
How to fit a piezo pickup and preamp into an acoustic guitar. The LC-5
Acoustic Guitar Diy Piezo Pickups
Acoustic Guitar Diy Piezo Pickups
  • Piezo pickups: These are the most common and affordable. They're sensitive to String vibration and are easy to install.
  • Magnetic pickups: These are designed for electric guitars but can work well with certain acoustic guitars that have steel strings.
  • Mic-blend systems: These combine a microphone with a piezo or magnetic pickup to capture both the direct string sound and the guitar's resonance.

For most acoustic guitars, piezo pickups are the best choice due to their affordability, versatility, and ease of installation.

In this guide, we'll focus on installing a passive piezo pickup, as it's the most straightforward and applicable to a wide range of guitars.

Make A Guitar Pickup For Free (Household Items)
Make A Guitar Pickup For Free (Household Items)
Acoustic Power: The magic of piezoelectricity — Haze Guitars
Acoustic Power: The magic of piezoelectricity — Haze Guitars

Choosing the Right Pickup

When choosing a pickup, consider its size, shape, and the number of elements (piezo crystals). A pickup that's too large can restrict your guitar's resonance, while one too small may not capture enough sound. Most piezo pickups come with preamp EQs, which allow you to shape your tone and balance the output levels.

Popular piezo pickup options include the Fishman Ellipse A4, Seymour Duncan Mini Acoustic, and LR Baggs VTC.

AD

Tools and Materials Needed

To install a pickup, you'll need:

  • A pickup suitable for your guitar
  • A preamp (if not included with your pickup)
  • A soldering iron and solder
  • Stranded guitar cable
  • petty screws and bolts
  • A drill (with a bit size compatible with your screws)
  • An adjustable wrench
  • Needle-nose pliers
  • Scratch awl or awl tool
  • Double-sided adhesive tape

Once you've gathered your materials, let's proceed to the installation.

Installing the Piezo Pickup

Installing a piezo pickup involves placing the pickup under the saddle and connecting it to a preamp, then finally mounting the preamp to your guitar. The process requires careful attention to detail and patience.

AD

Removing the Saddle

Begin by removing the saddle from your guitar. Most acoustic guitars have a saddle made of bone or plastic, which fits into a slot on the bridge. Using a flathead screwdriver, gently lift the saddle out of the slot.

Be extra careful not to damage the bridge or the saddle during this process. You may also want to take note of any saddle adjustments you've made, as you'll need to replace the saddle once the pickup is installed.

Installing the Pickup

Next, place the piezo pickup under the saddle. Most piezo pickups come with an adhesive back, so you can simply stick it onto the spot where the saddle usually sits. Ensure the pickup is centered and fully supported by the bridge.

AD

The pickup's wires should lead towards the soundhole, where you'll mount the preamp. If the wires are too long, you can trim them with wire cutters, being careful not to cut too much. If they're too short, you may need to extend them using guitar cable.

Mounting the Preamp

Now that the pickup is in place, it's time to mount the preamp. Most preamps come with screws and bolts for mounting. Using a drill and the appropriate bit size, make pilot holes in a convenient spot near the soundhole. Ensure the preamp is mounted securely, but not too tightly, to avoid stressing your guitar's body.

Once the preamp is securely mounted, connect the pickup wires to the preamp's input. Match the colors and positive/negative terminals, and solder them together. Be careful not to overheat the wires or the preamp during soldering.

Testing the Pickup

Before replacing the saddle, it's a good idea to test the pickup. Plug your guitar into an amp, and gently strum the strings. You should hear your guitar's sound coming through the amp. If there's no sound, double-check your solder connections and ensure that the pickup is properly seated.

Once you're satisfied with the sound, carefully replace the saddle, ensuring it's properly aligned and fits snugly in the bridge slot.

Setting Up the Preamp

The preamp allows you to adjust your pickup's volume and tone. Most preamps have controls for volume and mid-bass EQ:

  1. Volume: This controls the overall output level of your pickup. Rotate it clockwise to increase volume, and counterclockwise to decrease it.
  2. Mid-Bass EQ: This control shapes your guitar's tonal character. Turning it clockwise boosts mid and bass frequencies, while turning it counterclockwise cuts them.

Experiment with these controls to find the tone that best suits your guitar and playing style. Keep in mind that too much boost or cut can distort the sound, so subtle adjustments are usually best.

Routing the Output Cable

If your preamp has an output jack, you'll need to route the cable through your guitar. Start by drilling a small hole near the preamp, close to where you want the jack to be located. The hole should be just large enough to accommodate the jack's pedal/profile.

Route the cable through the hole, and secure the jack in place. Ensure the cable is secure and won't pull on the jack or the preamp. You can use double-sided tape or a cable clip to secure the cable along the guitar's body.

Finishing Touches

Once your pickup is fully installed and tested, it's time to put the finishing touches on your guitar. If you've drilled any holes, you may want to cover them with a matching material, such as wood or plastic, to maintain your guitar's aesthetic.

Remember to take your time and work carefully throughout the process. Your acoustic guitar is an investment, and you want to ensure that the pickup installation not only enhances its sound but also maintains its value and playability.

Embrace the transformation of your acoustic guitar into an amplified instrument. Whether you're playing at home, rehearsing with a band, or performing on stage, your pickup-equipped guitar will open up a new world of sonic possibilities. Happy strumming, and enjoy the journey of exploring your amplified acoustic guitar!

AD