how to install a moen shower head

Step-by-Step: How to Install a Moen Shower Head

By Thomas Anderson
AD

So, you've decided to upgrade your bathroom with a new Moen shower head? Great choice! Moen is renowned for their high-quality, durable, and stylish fixtures. Installing a Moen shower head might seem like a daunting task, but with our step-by-step guide, you'll be enjoying your new shower experience in no time. Let's dive right in!

This guide assumes you have basic DIY skills and will help you understand the installation process for both the common screw-on shower head and the less common shower arm installation. Before you start, ensure you have the right tools and understand the specific installation process for your Moen shower head model.

Preparation: Gather Tools and Materials

Before you begin, ensure you have all the necessary tools and materials at hand. For most installations, you'll need:

AD
How to Install a New Shower Head Tutorial
How to Install a New Shower Head Tutorial
Easily Install a New Shower Head
Easily Install a New Shower Head
How to Install Shower Head with Hose | Moen Magnetix Shower Head
How to Install Shower Head with Hose | Moen Magnetix Shower Head
  • Adjustable wrench
  • Teflon tape
  • Pipe dope (optional)
  • Adjustable pliers (optional)
  • New shower head
  • Rag or towel for cleanup

Understanding Your Shower Head Connection

Shower heads connect to the plumbing in two ways: screw-on and shower arm. Understanding your connection type is crucial for the installation process.

Screw-on shower heads are the most common type, fitting directly onto the shower arm with a threaded connection. Shower arm installations involve replacing the entire shower arm with a new one, usually when the old shower arm is damaged or incompatible with your new shower head.

Installing a Handheld Showerhead | Moen Guided Installation
Installing a Handheld Showerhead | Moen Guided Installation
Installing a new shower head and control.
Installing a new shower head and control.

Installing a Screw-On Moen Shower Head

Installing a screw-on Moen shower head is a straightforward process that typically takes around 15-30 minutes.

First, turn off the water supply to your shower at the main water valve. Open the shower faucet to release any remaining water pressure in the lines. This will prevent water from leaking or dripping while you're installing the new shower head.

AD

Remove the Old Shower Head

Using an adjustable wrench, slowly and carefully remove the old shower head from the shower arm. If it's difficult to turn, you can try to loosen it by wrapping the wrench with a cloth to prevent damage to the finish. If the old shower head is stuck, you can attempt to break the seal by wrapping the shower arm with a strap wrench or pliers, then gently tap it with a hammer.

Once the old shower head is removed, you may find remnants of old tape or mineral deposits on the threading. Clean the threading thoroughly using a wire brush or screwdriver to ensure a proper seal with the new shower head.

Prepare and Install the New Moen Shower Head

Before installing the new shower head, prepare the threading by wrapping it with Teflon tape. Wrap the tape clockwise around the threading, ensuring it's tightly wound and goes over the threading slightly. You can also apply pipe dope for an additional seal.

AD

Carefully screw the new Moen shower head onto the shower arm by hand as far as it will go. Then, use an adjustable wrench to tighten it another 1/4 to 1/2 turn. Be careful not to overtighten, as this can cause damage or strip the threading.

Installing a Moen Shower Head with a Shower Arm

If you're replacing the entire shower arm, the process is similar but involves a few additional steps.

First, follow the same initial steps as in the screw-on installation: turn off the water supply, open the shower faucet to release pressure, and remove the old shower head and shower arm using an adjustable wrench.

AD

Install the New Shower Arm

Begin installing the new shower arm by wrapping the threading at the end of the shower arm with Teflon tape just like you would with a shower head. Also, wrap the threading at the end of the shower pipe where the shower arm connects.

Hand-tighten the new shower arm onto the shower pipe, then use an adjustable wrench to secure it another 1/4 to 1/2 turn. Be sure not to overtighten, as this can cause damage or create leaks.

Install the New Moen Shower Head

With the new shower arm installed, you can now proceed to install the new Moen shower head as described in the previous section. Wrap the threading with Teflon tape (or apply pipe dope), screw on the new shower head by hand, and then use an adjustable wrench to secure it another 1/4 to 1/2 turn.

Once the new Moen shower head is installed, turn the water supply back on slowly. Check for any leaks around the shower head and shower arm connections. If everything is sealed properly, you should be ready to enjoy your new, high-quality Moen shower head!

Regularly cleaning your Moen shower head will help maintain its performance and longevity. Remove mineral deposits and residue by soaking it in white vinegar, and always follow the manufacturer's care instructions for your specific model.

Congratulations on successfully installing your new Moen shower head! Now, sit back, relax, and enjoy the blissful rain of water cascading from your stylish, high-performing Moen fixture. Happy showering!

AD