how to install a license plate light

Step-by-Step Guide: How to Install a License Plate Light

By Mark Anderson
AD

Installing a license plate light might seem like a daunting task, but with the right guidance, it's a straightforward process that can be completed in a relatively short time. Not only does it enhance the visibility of your license plate for other drivers, but it also ensures you're in compliance with most U.S. states' laws, which mandate rear license plate illumination.

The following comprehensive guide will walk you through the entire process, from gathering necessary tools to double-checking your work. Let's dive right in and ensure your license plate light is installed correctly and safely.

Gather Tools and Materials

Before starting any project, it's essential to have the correct tools. For this task, you'll need:

AD
2017 Ford Explorer License Plate Light Install!
2017 Ford Explorer License Plate Light Install!
VW MK5 GTI / Golf LED License Plate Light DIY by USP Motorsports
VW MK5 GTI / Golf LED License Plate Light DIY by USP Motorsports
DIY: How to Make a License Plate Lamp
DIY: How to Make a License Plate Lamp
  • License plate light kit (ensure it's compatible with your vehicle's make, model, and year)
  • Socket wrench or screwdriver (usually 10mm or 13mm, depending on your vehicle's make)
  • Wire strippers
  • Electrical tape
  • Rubber gloves (for safety)

Check Your Vehicle's Compatibility

It's crucial to confirm that the license plate light kit you've purchased is suitable for your vehicle. Most kits come with specific make and model information, but double-checking ensures the kit will fit and function correctly.

Additionally, familiarize yourself with your vehicle's electrical system by consulting its repair manual. Every vehicle's electrical system is unique, and understanding how yours works will make the installation process smoother.

License Plate 168 194 LED Light Bulb Installation Guide
License Plate 168 194 LED Light Bulb Installation Guide
A Nation of Moms License Plate Search Engines: How They Work Technology
A Nation of Moms License Plate Search Engines: How They Work Technology

Prepare the Installation Area

Park your vehicle in a well-lit, safe, and flat area. If you're working in a garage, make sure there's sufficient ventilation. Put on your rubber gloves for safety and turn off your vehicle's ignition to avoid any electrical mishaps.

Place your tools and the license plate light kit within reach to keep your workspace organized and clutter-free.

AD

Locate the Taillight Assembly

Open your vehicle's trunk and locate the taillight assembly. On most vehicles, it's a vertical panel near the rear of the vehicle. In some cases, you might need to remove the interior trim or access panels to expose the taillight assembly.

Inspect the taillight assembly for any damage or wear, as this could affect the license plate light's installation or overall safety.

Remove the Taillight Assembly

Using your socket wrench or screwdriver, remove the screws or bolts securing the taillight assembly. The size of the socket or screwdriver may vary based on your vehicle's make and model, so consult your repair manual if needed.

AD

Gently pull the taillight assembly away from the vehicle to detach it. There should be enough clearance to work without any obstructions. Be mindful not to damage any electrical connections during removal.

Install the License Plate Light Kit

Now that you have access to the taillight assembly, you can begin installing the license plate light kit. Most kits come with detailed instructions, but the following steps provide a general overview of the process.

Before you start, ensure the license plate light kit is compatible with your vehicle's taillight assembly. If modifications are required, make them carefully to avoid damaging the kit or your vehicle.

AD

Prepare the Wiring

Strip the wire ends of the license plate light kit using wire strippers. Be careful not to strip too much insulation, but ensure there's enough exposed wire to create a secure connection with your vehicle's existing wiring.

Next, locate the trailing edge connector (T-bone connector) on your vehicle's wiring harness. This connector powers the rear lights and is usually found near the taillight assembly. Identify which wire within the connector powers the license plate light (consult your repair manual if needed).

Connect the Wiring

Before connecting the license plate light kit to your vehicle's wiring, double-check that the taillight assembly is still fully disconnected. This step ensures you're working with dead electrical circuits and prevents any accidental short circuits.

Connect the stripped wire ends of the license plate light kit to the corresponding wire in the trailing edge connector. In most cases, you'll use a T-connector or wire nuts to create a secure connection. Ensure the wires are fully inserted into the connector or wire nut and that there are no exposed wire ends.

Secure the connection using electrical tape, wrapping it around the connection point to prevent any movement or potential short circuits.

Install the License Plate Light Housing

The license plate light housing should now be attached to the exterior of the taillight assembly. Follow the kit's instructions for the specific attachment process, which may involve using screws, adhesive, or snapping the housing into place.

Once the housing is secured, it should be flush with the taillight assembly and not obstructed by any interior panels or trim. Ensure the license plate light is aimed correctly, so it illuminates the license plate evenly and doesn't reflect off the rear glass or nearby surfaces.

Test the Installation

Before reattaching the taillight assembly, turn on your vehicle's ignition without starting the engine. The license plate light should illuminate, indicating that the wiring connection is secure and functional. If the light doesn't work, double-check your wiring connections and ensure all wires are correctly inserted into the appropriate connector.

With the license plate light functional, reattach the taillight assembly using the original screws or bolts. Secure the assembly firmly, but be careful not to overtighten and damage the taillight or surrounding panels.

Final Inspection

Perform one last visual inspection of the license plate light installation to ensure it's secure, properly aimed, and free of any obstructions. Walk to the rear of your vehicle and confirm that the light illuminates your license plate clearly and evenly. Make any necessary adjustments to the light's aim before concluding the installation.

With your license plate light installed and tested, you can confidently drive knowing that both you and your vehicle are in compliance with local laws, and you've enhanced safety for yourself and other drivers on the road. Happy driving!

AD