Step-by-Step Guide: How to Install an Intex Pool Pump
Installing an Intex pool pump can seem like a daunting task, but with the right guidance, it's a manageable project that will ensure your pool stays clean and inviting all season long. This guide will walk you through the process, from unboxing to testing, so you can confidently install your new Intex pool pump.
Before we dive in, ensure you have all the necessary tools and parts. Your Intex pool pump kit should include the pump, hoses, a filter, and a skimmer plate. You'll also need a few basic tools like a screwdriver, adjustable wrench, and a pair of scissors for cutting and preparing the hoses.
Understanding Your Pool Pump System
To begin, let's familiarize ourselves with the components of your Intex pool pump system. The main parts are the pump, filter, skimmer, and hoses. Understanding how these parts work together will help you install your pump correctly.
The pump is the heart of your pool's circulation system. It sucks water through the skimmer and drains, pushes it through the filter to remove debris and contaminants, then returns the clean water to the pool via the return jets. The filter is responsible for cleaning the water, and the skimmer captures larger debris before it enters the pump.
Positioning Your Pool Pump
First, decide on the location of your pump. It should be close to the pool, preferably within a few feet, to minimize the distance water has to travel. Consider accessibility and noise levels when choosing a location. Keep in mind that the intake and discharge pipes should be level to ensure proper water flow.
Once you've decided on the location, use a level to ensure the ground is flat. If not, you may need to create a flat surface using concrete blocks or a piece of plywood. Lay your pump on the flat surface and affirm it's level in all directions. The pump's lid should be flat and horizontal to the ground.
Installing the Skimmer Plate
The skimmer plate, or skimmer basket, fits into the skimmer opening at the top of your pool. This component captures large debris before it reaches the pump, preventing clogs and damage. To install, lift the skimmer lid and locate the tabs or hooks where the skimmer plate will attach. Align the plate with these tabs and firmly press it into place until it snaps or clicks.
Ensure the skimmer plate is correctly seated and doesn't wobble. If it's not secure, carefully remove it and try again. Once in place, the plate should fit flush with the surface of the pool, providing a smooth surface for water to flow over.
Connecting Your Pool Pump to the Plumbing
Now that your pump and skimmer are in place, it's time to connect the plumbing. This involves attaching the hoses and ensuring proper water flow. Remember, water should always flow from the skimmer to the pump, through the filter, then back into the pool.
Before connecting the hoses, ensure they're appropriately sized. Your Intex pool pump kit should come with two hoses - one for intake (suction) and one for discharge (return). The intake hose connects the skimmer to the pump, while the discharge hose returns clean water to the pool.
Attaching the Intake Hose
First, connect the intake hose to the skimmer's outlet. Twist the hose clockwise onto the skimmer's barb, ensuring it's a tight fit. Then, connect the other end of the intake hose to the suction port on your pump (usually labeled "In" or has an arrow pointing in). Twist the hose onto the pump's barb, again ensuring a tight fit.
Once attached, check for leaks by running your hand along the connections. Tighten any loose connections with an adjustable wrench, but be careful not to overtighten and damage the threads.
Attaching the Discharge Hose
Next, connect the discharge hose to the pump's discharge port (usually labeled "Out" or has an arrow pointing out). Again, twist the hose clockwise onto the pump's barb, ensuring a tight fit. Then, connect the other end of the discharge hose to the return jet in your pool. Most Intex pools have multiple return jets; choose one that's closest to the pump for the best water flow.
Ensure the discharge hose is long enough to reach the return jet without kinks or sharp bends. Kinks can restrict water flow and cause your pump to work harder, potentially leading to damage. If the hose is too short, you may need to purchase an extension.
Installing Your Pool Filter
Now that your pump is connected to the pool's plumbing, it's time to install the filter. The filter is critical for keeping your pool water clean and clear. There are several types of pool filters, but this guide will focus on sand filters, as they're common in Intex pools.
Sand filters use sand as the filtering medium. They're simple to maintain and can last for years with proper care. To install, place the sand filter near your pool pump, keeping the intake and discharge pipes level. The intake pipe should connect to the skimmer, while the discharge pipe returns clean water to the pool.
Preparing the Filter for Use
Before first use, you need to prime and backwash your sand filter. Priming ensures the filter is full of water, while backwashing cleans the filter and refills it with water in the proper direction.
To prime your filter, pour water into the skimmer until it reaches the top of the skimmer opening. Then, turn on your pump and let it run for a few minutes. The water should pull through the filter and start circulating through the system. Once water is flowing through the return jets, turn off your pump.
Backwashing Your Filter
Now, backwash your filter to clean it and refill it with water in the correct direction. To do this, first, set the multiport valve on your filter to the "waste" position. This will direct water from the filter back into the waste line, cleaning the sand and removing any debris.
Turn on your pump and let it run for about a minute, then turn it off. Set the multiport valve back to the "filter" position. Now, your filter is primed and ready for use. Turning on your pump should start the normal filtration process, pulling water through the skimmer, through the filter, and back into the pool.
Testing Your Pool Pump System
With your pump and filter installed, it's time to test your entire pool pump system. Start by turning on your pump and observing the water flow. The skimmer should suck water in, the pump should hum to life, and the return jets should spit out clear, flowing water.
Check all connections for leaks, and ensure the water is flowing correctly through the system. If everything looks good, let your pump run for about 15-30 minutes to ensure proper water circulation and to clear any small debris that may be in your pool.
Congratulations! You've successfully installed your new Intex pool pump. Regularly maintain your pump and filter to keep your pool clean and clear all season long. And remember, if you ever have any questions or concerns, don't hesitate to reach out to a professional for advice.