how to install a filtrete air filter

Step-by-Step: How to Install a Filtrete Air Filter

By Mark Martin
AD

Replacing your air filter is a crucial part of maintaining your HVAC system's efficiency and cleanliness. The Fibaturing FILTRETE Ultimate Allergen Defense Air Filter is designed to capture even the tiniest particles, making it an excellent choice for allergy sufferers. Let's guide you through the simple process of installing a Filtrete air filter.

Before you start, ensure you have your new air filter on hand, and consult your HVAC system's manual to confirm the filter size and type. The Filtrete Ultimate Allergen Defense filter comes in a variety of sizes and suitability for different systems, so it's essential to select the correct one.

Understanding Your HVAC System

Familiarize yourself with your HVAC system's location and the type of filter it uses. Most systems use either a standard panel filter (furnace-based) or a slide-in filter (console-based).

AD
How to Easily Change an Air Filter in the Ceiling | April Colleen
How to Easily Change an Air Filter in the Ceiling | April Colleen
Furnace Filter FAQ: Which Way Does the Air Flow Arrow Go?
Furnace Filter FAQ: Which Way Does the Air Flow Arrow Go?
an air conditioner that has been cleaned and replaced
an air conditioner that has been cleaned and replaced

Standard panel filters typically sit behind a metal door at the bottom or side of the furnace. Slide-in filters, on the other hand, are usually located in the return air duct, which can be found in the ceiling, walls, or floor.

Locating the Air Filter

Once you've determined the type of air filter your system uses, locate the filter. On panel filters, the filter door is usually marked with 'filter' or 'air cleaner.' For slide-in filters, the access panel may say 'filter' or 'air cleaner' as well. If you're unsure, consult your HVAC system's manual.

How Often Should You Change Your Home Air Filter? (Most People Guess Wrong)
How Often Should You Change Your Home Air Filter? (Most People Guess Wrong)
Which Direction Does The Arrow Go When Installing an Air Filter? (How to Change Your Air Filter)
Which Direction Does The Arrow Go When Installing an Air Filter? (How to Change Your Air Filter)

Using a screwdriver, carefully remove the screws holding the filter door or access panel in place. Some modern systems may have a quick-release mechanism instead of screws. If your system has a filter-light indicator, reset it after removing the old filter.

Removing the Old Filter

When you open the panel, you'll see the old filter. It might be dirty and brittle, so handle it carefully to avoid damaging your HVAC system. Pop out the old filter by gently pulling it out from both ends and observe the direction of the airflow arrows.

AD

Note the airflow arrows on the new filter. It's crucial to install the new filter in the same direction to ensure proper airflow. The arrows should point towards the return duct, acting as a guide for your new filter's installation.

Installing the New Filter

With the old filter removed, it's time to install the new Filtrete Ultimate Allergen Defense air filter.

Carefully slide the new filter into place, ensuring the airflow arrows match the direction indicated by the arrows on the inside of your HVAC system. If the filter doesn't fit perfectly, it may be installed backward or is the incorrect size. Double-check your measurements and directions.

AD

Making Adjustments

If minor gaps exist between the filter and the frame, don't worry – this is normal for your system. However, any tilted or crooked filter should be adjusted. A misaligned filter can cause air to bypass it, reducing its effectiveness and putting additional strain on your system.

Use a piece of cardboard or asbestos-free insulation to seal any significant gaps. If needed, you can also adjust the filter's fit by gently bending the frame. Ensure you don't bend the filter media, though, as it could damage the filter and render it less effective.

Securing the Filter

Once the new filter is secured and properly aligned, gently replace the filter door or access panel. Ensure that it's fully seated and tightly closed to prevent air leaks. If you have resettable screws, tighten them fully, and if not, secure the door using clips or snaps.

AD

For the first few hours after installation, you may experience a temporary reduction in airflow and air quality. This is normal as the new filter traps dust and other airborne particles, reducing the efficiency of your system temporarily. Within a few days, your HVAC system should return to normal operation.

In a few months, you'll need to replace your filter again. Make it a habit to check your filter once a month and replace it every 1-3 months, depending on your usage and household conditions. A clean filter ensures optimal performance and energy efficiency, improving your indoor air quality and reducing allergy and asthma symptoms.

AD