how to install a compustar remote start

CompuStar Remote Start: Step-by-Step Installation Guide

By William Miller
AD

Installing a Compustar remote start system can enhance your vehicle's convenience and security, allowing you to start your engine, unlock doors, and activate features like heated seats from a distance. This guide will walk you through the process, ensuring your installation is safe and effective.

Before you begin, gather your installation kit, which includes the main control module, remote fobs, wire harness, antenna, and all necessary hardware. Also, have your vehicle's owner's manual nearby for reference. Now, let's dive into the installation process.

Understanding Your Vehicle's Wiring

To ensure a successful installation, it's crucial to understand your vehicle's wiring harness. Familiarize yourself with the colors and functions of the wires connected to your vehicle's ignition, accessory, and battery terminals. This information will help you connect your Compustar system correctly.

AD
HOW-TO: Install a Car Alarm & Remote Starter (355)
HOW-TO: Install a Car Alarm & Remote Starter (355)
Remote Start & Car Alarms | Crutchfield
Remote Start & Car Alarms | Crutchfield
the interior of a car with black leather seats and steering wheel, dashboard controls and dash board
the interior of a car with black leather seats and steering wheel, dashboard controls and dash board

Use a wiring diagram or your vehicle's wiring manual to determine the exact wire locations and functions. Once you've identified the necessary wires, label them temporarily with tape or a marker for easy reference during the installation.

Mounting the Main Control Module

Finding the Ideal Location

The main control module should be installed in a secure, dry location under your vehicle's dashboard. Common spots include the glove box, center console, or under the driver's seat. Consider the layout of your vehicle's wiring harness when choosing a location.

How to Use Remote Starter Switch | 10 Useful Tips (2026)
How to Use Remote Starter Switch | 10 Useful Tips (2026)
the gps device is shown with an image of a car on it's screen
the gps device is shown with an image of a car on it's screen

Make sure the mounting area is clean and free of dirt, debris, and any existing wires that could interfere with the installation. If necessary, use cable ties or clips to secure the module in place and protect it from damage.

Connecting the Wire Harness

With the main control module mounted, connect the wire harness to the module, ensuring each wire connects to the corresponding terminal. The wire harness should come with a diagram illustrating the correct connections. Double-check your wire labeling from earlier to ensure accurate matching.

AD

Once all wires are connected, gently route the wire harness from the module to the vehicle's electrical junction box (or under the steering wheel column) for further connection to the vehicle's wiring.

Installing the Antenna

Mounting the Antenna

The antenna should be mounted within the vehicle's cabin, typically on the roof or dashboard, away from metal objects. Use the provided hardware to securely attach the antenna in place, ensuring it's firmly mounted and not susceptible to vibrations or movement.

Keep the antenna away from potential Interference, such as metal objects, other antennas, or electronic devices. Test the antenna's reception by activating the remote fobs from various locations around the vehicle to ensure optimal signal strength.

AD

Connecting the Antenna Cable

Connect one end of the antenna cable to the main control module, following the terminal diagram. Route the cable along the vehicle's headliner or under the dashboard, ensuring it's out of sight and protected from damage.

The other end of the antenna cable connects to the antenna module itself. Ensure a tight, secure connection, and protect the cable with wire loom or tape if necessary.

Connecting to Your Vehicle's Wiring

Power, Ignition, Accessory, and Ground Connections

With the main control module and antenna installed, it's time to connect the system to your vehicle's wiring. Locate the battery terminal, ignition (or ACC) wire, and accessory (constant power) wire. Also, identify a suitable ground point, typically a metal component securely bonded to the vehicle's frame.

AD

Connect the power, ignition, accessory, and ground wires from the Compustar system to the corresponding vehicle wires. Ensure each connection is secure, and use appropriate wire connectors or crimp-on terminals to maintain a solid electrical connection.

Door Lock and Horn Connections

Connect the door lock wires to the corresponding vehicle wire that controls the power door lock actuators. This allows your remote fobs to lock and unlock your vehicle's doors.

Connect the horn wire to the vehicle's horn circuit. This enables the remote start function to honk the horn as a confirmation signal after starting or locking the vehicle.

Programming the Remote Fobs

Activating the Main Control Module

With all wiring connections completed, activate the main control module by connecting the ignition (ACC) wire. The module's LED should flash, indicating it's in programming mode.

Use the provided programming tool (usually a keyfob or a scanfob) to enter programming mode. Consult your system's user manual for the exact programming sequence, which typically involves pressing specific buttons on the programming tool in sequence.

Syncing the Remote Fobs

Once in programming mode, sync the remote fobs by placing them face down on the vehicle's roof or hood. Press the 'Lock' button on each fob repeatedly until the main control module's LED changes from flashing to solid, indicating successful syncing.

Test your remote fobs by locking and unlocking your vehicle's doors, triggering the alarm function (if equipped), and starting the engine remotely. Double-check that your Compustar remote start system is functioning as expected before finalizing the installation.

You've now successfully installed a Compustar remote start system in your vehicle. Embrace the convenience and enhanced security it provides, and always remember to operate the system responsibly. Happy driving!

AD