how to hook up a metra line output converter

Connect Your Audio: Metra Line Output Converter Setup Guide

By Emily Taylor
AD

Tired of your audio setup lacking that extra oomph? The Metra Line Output Converter (LOC) can remedying that, but only if you know how to hook it up correctly. We've got you covered with this comprehensive guide, making your audio experience richer and more engaging than ever.

First off, let's understand what the Metra LOC does. It's a device that extracts the line-level output signal from your vehicle's head unit, amplifying it to higher levels, thereby improving the overall sound quality. Now, let's dive into the step-by-step process.

Unboxing and Preparing the Metra LOC

The package includes the LOC itself, a Instructions manual, a wiring harness, and possibly some extra merge blocks or wire extensions. Ensure everything's in the box before you start.

AD
Line Output Converter Wiring Diagram
Line Output Converter Wiring Diagram
How To Install a Line Out Converter (LOC) | Installation and Tips
How To Install a Line Out Converter (LOC) | Installation and Tips
Kicker 46KISLOC K-Series Interconnect, Speaker To Rca W/ Line-Out Converter & 46QI21 1 Meter 2-Channel Signal Cable
Kicker 46KISLOC K-Series Interconnect, Speaker To Rca W/ Line-Out Converter & 46QI21 1 Meter 2-Channel Signal Cable

Take out the LOC and familiarize yourself with its components. There are input and output RCA jacks, a power albeit, and a gain knob. The wiring harness might have different Pogies (quick and easy wiring connectors) for power, ground, and remote turn-on.

Identifying Necessary Wires

The wiring harness usually comes with color-coded wires for easy identification. The most common wires you'll need are:

the wiring diagram for an rv radio with four different types of wires and connectors
the wiring diagram for an rv radio with four different types of wires and connectors
  • Power (usually red or yellow): Connects to your vehicle's power source.
  • Ground (usually black or green): Connects to your vehicle's chassis.
  • Remote Turn-On (usually blue or white): Connects to your head unit's remote turn-on wire. If your head unit doesn't have one, you can safely skip this.

Locating Wiring Points

For power, you'll typically tap into one of the following:

  1. Accessory: This comes on when you turn the ignition on and goes off when you turn the vehicle off.
  2. Power Antenna: This provides continuous power even when the vehicle is off.
  3. Battery: This provides power directly from the battery. Use this if you want the LOC to function always, but be aware of the battery drain.

Wiring the Metra LOC

Now that we've identified the necessary wires and their locations, let's proceed with the wiring.

AD

Start by running the wires from the LOC to their respective locations. Keep them neat and organized to avoid confusion and interference. Once done, proceed with the actual wiring:

Power and Ground

Strip the ends of the power and ground wires, then connect them to their respective points using appropriate connectors (like ring terminals or spade connectors). Ensure they're secured well to avoid any rattles or short circuits.

artikel-periodic Check your connections. A poor power or ground connection can cause all sorts of problems, from intermittent operation to complete failure. The power and ground connections are the lifeblood of the LOC; make sure they're good and robust.

AD

Remote Turn-On

If you're using a head unit with remote turn-on, locate the wire (usually denoted in the head unit's wiring diagram or directly written on the wire). Connect the remote turn-on wire from the LOC to this wire.

If your head unit doesn't have a remote turn-on wire, you can skip this step. The LOC will power on when you turn on your vehicle's ignition.

Connecting the RCA Cables

Now, connect the RCA cables from your head unit's line-level outputs to the LOC's input RCA jacks. Just plug 'em in, ensuring the colors match (red to red, white to white).

AD

Then, connect another set of RCA cables from the LOC's output jacks to your amplifier. These RCA cables will carry the amplified signal to your amp, which will then drive your speakers.

Mounting and Final Checks

Once everything is wired up, mount the LOC in a secure, dry, and cool place. Make sure the wiring won't get pinched or stressed, and it's not running under any high-heat areas.

Before you power up, give your work a final check. Ensure all connections are secure, and nothing is loose. Check your wiring for any shorts or fatigue. Then, connect your vehicle's power and turn the key to the "ON" position. The LOC should power on and be ready to amplify your sound.

Setting the Gain

The final step is to set the gain. With your music playing at a comfortable level, turn the gain knob on the LOC clockwise. Keep turning until the needles on your amp fluctuate a bit, then turn it back anti-clockwise slightly to bring them back to the middle. This will provide the maximum headroom without overloading your amp.

And there you have it, folks! Your Metra LOC should now be hooked up and amplifying your sound to new heights. Enjoy your improved audio experience!

AD