how to hem scrub pants

How to Perfectly Hem Scrub Pants

By Christopher Robinson
AD

Have you ever found your scrub pants a bit too long, always getting tucked into your socks or shoes? It's time to take matters into your own hands. Learning how to hem scrub pants isn't as daunting as it sounds. In fact, it's a simple process that can save you time and money. So, let's roll up our sleeves, gather our materials, and dive right in.

Before we start, let's quickly discuss why you might want to hem your scrub pants. Apart from the obvious discomfort of tripping on excess fabric, hemming also helps prevent premature wear and tear, keeps your pants looking neater, and can even lengthen their lifespan. Now that we've established why it's a good idea, let's get down to business.

Gathering Your Materials and Tools

Hemming scrub pants isn't a complex task, but it does require a few essential tools. Here's what you'll need:

AD
an image of how to hem pants with or without sewing machine
an image of how to hem pants with or without sewing machine
Everything you Need to Know About Hemming Pants!
Everything you Need to Know About Hemming Pants!
How to hem pants the easy way and get professional results - Live Hoppy
How to hem pants the easy way and get professional results - Live Hoppy

- Scissors

- A sewing machine or needle and thread (if you prefer hand sewing)

the easyest way to hem pants with a sewing machine and instructions for making them
the easyest way to hem pants with a sewing machine and instructions for making them
Hem Pants, Keeping the Original Hem
Hem Pants, Keeping the Original Hem

- Tape measure

- A fabric marker or chalk

AD

- Straight pins

- A tailor's tape or a safety pin for trying on (optional)

Measuring Your Scrub Pants

Before you cut anything, you need to determine how much length you want to remove. Here's a simple way to do it:

AD

- Put on your scrub pants and the shoes you'll be wearing with them.

- Using your tailor's tape or a safety pin attached to your pants, find where you want the hem to be. This should be about an inch or less from the floor, depending on your personal preference.

Marking and Cutting

Once you've decided on the length, it's time to mark your scrub pants.

AD

- Take off your pants and lay them flat on a table. Make sure the seams are straight.

- Using your fabric marker or chalk, draw a line all the way around the pants at the desired hem length. This is the line you'll be cutting along.

- Before you cut, double-check that your measurements are correct. It's much easier to add length back than it is to make more if you cut too much off.

- Cut along the marked line, making sure to stop at the start of the seam. You don't want to cut through the seam itself.

Hemming Method 1: Single Fold Hem

The single fold hem is the most common type of hem and the one we'll focus on first. It's simple, neat, and works well for most types of fabric.

Folding the Hem

Now that you've cut your scrub pants, it's time to create the actual hem.

- Turn your pants leg inside out, so the right sides are facing each other.

- Fold the raw edge of the fabric up to the line you marked earlier. This is your first fold.

- Press the fold to help it stay in place.

Stitching the Hem

Once your fold is in place, it's time to whip out your sewing machine or needle and thread.

- If you're using a sewing machine, thread it with a versatile, matching or complementary color of thread. A thin, medium-weight thread works best for most scrub pants fabrics.

- Place your pants leg under the presser foot, with the raw edge facing up. Start at the seam and begin sewing along the bottom of your first fold. Make sure to backstitch at the beginning and end to secure your stitches.

- Keep sewing all the way around the leg, stopping just before you reach the other seam. Make sure to keep your stitching even and approximately 1/4 inch from the raw edge.

- Once you've sewn all the way around, try on your pants to see if any adjustments need to be made. If the hem is even and the length is where you want it, you're done!

Felling the Hem (Optional)

For a more polished look, you can fell the hem, which involves folding the raw edge of the fabric inward before stitching. This creates a smooth, finished edge on the inside of the hem.

- After folding your hem as before, turn your pants leg inside out again. Press the raw edge of the fabric in toward the center of the leg, using the first fold as your guide. Since you'll be sewing over this fold, you don't need to press it.

- Starting where you began before, stitch along the bottom of your fold as you did earlier. This time, however, you'll be stitching directly over the raw edge of the fabric, effectively hiding it inside the hem.

Hemming Method 2: Blind Hem

A blind hem is a bit more advanced than the single fold hem, but it's well worth the extra effort if you want a seamless, professional look.

Folding the Hem

Blind hems start the same way as single fold hems, with one key difference.

- Instead of folding your raw edge up to the line you marked earlier, fold it up just short of that line. Then, press the fold.

Trimming and Folding Again

The next step is what sets the blind hem apart from other types of hems.

- Trim the excess fabric from the top of your fold, using the first fold as your guide. You can trim it back to about 1/4 inch, but the exact amount will depend on the width of your pants leg.

- Fold your raw edge up again, this time all the way to your original line. Press this second fold to help it hold its shape.

Stitching the Blind Hem

Now comes the tricky part of the blind hem.

- Start stitching as you would with a single fold hem, but stop just before you reach the trim. At this point, instead of continuing to sew along the bottom of your fold, you'll be sewing through the top layer of fabric only, stitching along the original folded edge.

- When you reach the trim, simply stitch right over it. You'll create a small dipped stitch here, which is completely normal and helps create the "blind" effect.

- Continue stitching all the way around the leg, making sure to backstitch at the beginning and end. Once again, try on your pants to ensure the hem is even and the length is correct.

There you have it! You've successfully hemmed your scrub pants. With a little practice, you'll be taking in hems like a pro in no time. So, why not give it a try? Your comfy scrubs will thank you, and you might just save some money while you're at it. Happy hemming!

AD