how to hang a european mount on the wall

"How to Mount a European Shoulder on the Wall"

By Hannah Wilson
AD

Ah, the European mount: a stunning addition to any home or office, showcasing the beauty and majesty of nature. If you're eager to display your prize, you may be wondering how to hang a European mount on the wall. Don't worry, with the right techniques, a little patience, and the right hardware, you'll have your mount securely fixed and ready to impress. Let's dive into the step-by-step process.

Before we start, it's crucial to gather all the necessary tools and materials. You'll need a European mount—of course—a level, a drill, screws, wall anchors (if your wall is hollow), and a pencil. It's also a good idea to have a small ladder or step stool to help you reach the desired height.

Selecting the Perfect Location

The first step in hanging your European mount is choosing the ideal spot. Prime locations include areas where the mount will complement the decor, draw the eye, and add an element of conversation to your space. Consider the size of your mount and ensure it doesn't overwhelm the space or blend into the background.

AD
12 European Mount Ideas for Your Home
12 European Mount Ideas for Your Home
the corner of a room with a door handle and screws attached to the wall
the corner of a room with a door handle and screws attached to the wall
DIY: BUDGET EURO SKULL HOOK MOUNT
DIY: BUDGET EURO SKULL HOOK MOUNT

Once you've found the perfect spot, decide on the height. The center of your European mount should be around 57 to 60 inches from the floor, similar to the average height of a person's eye level. This ensures optimal viewing and appreciation of your mount while maintaining a comfortable viewing angle.

Marking and Measuring

Finding the Center

To ensure your European mount is centered and balanced, you'll need to find its center point. Place your mount on a flat surface and locate its center by drawing an imaginary line from one antler point to the corresponding point on the other side, then marking the midpoint.

For European mounts with skull plates, the center is typically the lowest point on the base of the skull, just above the jaw. Mark this point with a small pencil dot for easy reference during the installation process.

Marking the Wall

Now that you've found the center of your mount, transfer this measurement to the wall. Using a pencil and level, mark the desired height for hanging your mount. Then, using the center mark on your mount, draw a horizontal line to indicate where the base of your mount will rest against the wall.

AD

Once you have your horizontal line, measure out the length of your mount on either side of the center mark. This will give you the precise points where you need to drill your pilot holes.

Predrill and Anchor

Predrilling Pilot Holes

Grab your drill and a drill bit slightly smaller than the width of your screws. At the marks you've made on the wall, carefully drill pilot holes. These holes will make it easier to drive your screws and help prevent the wall material from cracking or crumbling.

If you're drilling into hollow walls, it's essential to use wall anchors to provide extra support and prevent your screws from disintegrating into the wall over time. Insert your wall anchors into the pilot holes, tapping them gently until they're secure and flush with the wall's surface.

AD

Attaching the Hardware

Now it's time to secure your screws or wall anchors. Using a drill or screwdriver, insert your screws or wall anchors into the predrilled holes. Make sure you don't overtighten, as this can cause stripping or further damage to the wall.

For double-sided tape, adhesivestrips, or other non-drilling hanging methods, ensure you follow the manufacturer's instructions for proper adhesion and support. Remember that these methods may not provide the same level of security as drilling into the wall.

Hanging Your European Mount

Positioning the Mount

With your hardware securely in place, it's time to hang your European mount. Start by carefully lifting your mount to the wall, positioning it so that the center mark aligns with the line you've drawn. Ensure the base of the mount rests evenly against the wall.

AD

If you're using hooks or brackets, gently place the mount onto the hardware, ensuring it's balanced and secure. For European mounts with a loop or wire, simply place the mount against the wall and hook the loop or wire onto your screw or anchor.

Securing the Mount

Once your mount is positioned, check that it's level and centered. Make any necessary adjustments before securing it in place. For mounts with L-brackets, tighten the screws to ensure a secure fit. If you're using picture hanging wire or loop, gently pull down on the mount to ensure it's taut and secure.

Stand back and admire your new addition to the wall. Your stunning European mount is now proudly displayed for all to see and appreciate.

As you enjoy your new decor, remember to occasionally check on your European mount to ensure it remains secure and level. With care and proper maintenance, your mount can bring beauty and conversation to your space for years to come. So go ahead, share your thrilling tale of the hunt, and bask in the glory of your triumph over nature. Happy mounting!

AD