" hang Cowhide on Wall: Expert Guide "
Hanging a cowhide on the wall is a unique way to bring a touch of the rustic and rugged to your home decor. Not only does it serve as a striking visual element, but it also adds a cozy, warm feeling to any space. Here's a comprehensive guide on how to do it right, ensuring your cowhide is securely and beautifully displayed.
Before you start, there are a couple of things you need to consider. First, determine where you want to hang your cowhide. Smaller hides look great on feature walls or above sofas, while larger ones can create a statement in entryways or above dining tables. Secondly, consider the direction of the hair. Place the hide so that the hair points downwards for a more natural look.
Gathering Your Tools and Materials
Before you begin, ensure you have all the necessary tools and materials. You'll need:
- A cowhide rug
- Wall hooks or a hanging hardware kit specifically designed for hides
- A level
- A tape measure
- A drill (if not using command strips)
- Picture hanging wire (optional, for larger hides)
Choosing the Right Hardware
Wall hooks are suitable for smaller hides, while larger ones may require a hanging hardware kit. These kits often come with a wooden board and screws, which can support the weight of the hide. Some also include picture hanging wire, which can be used to support the hide's center of gravity.
For a non-permanent solution, command strips designed for heavy items can be used. These are especially handy if you're renting or don't want to drill holes in your wall.
Preparing the Wall
Before you start drilling or placing command strips, ensure the wall is clean and dry. If you're hanging the hide on a concrete wall, you may need to use a masonry drill bit and wall plugs designed for concrete.
Measure the height and width of your cowhide. Use a pencil and level to mark these measurements on the wall. If using a kit, also mark where the screw holes will go. For multiple hooks, ensure they're evenly spaced.
Marking the Hanging Points
For smaller hides, mark one point at the top center. For larger hides, mark multiple points to ensure even distribution of weight. If using a kit, follow the included instructions for marking screw holes.
If using picture hanging wire, measure and cut two pieces, one for each side of the hide. Mark where these will attach to the wall.
Hanging the Cowhide
Now that you've prepared the wall, it's time to hang your cowhide. For wall hooks or command strips:
- Attach the hooks or command strip pads to the wall, aligning them with your marks.
- Carefully lift the hide and place the top edge over the hooks or press it firmly against the command strips.
- Adjust the hide so it hangs straight, using the level if necessary.
Using a Hanging Hardware Kit
If using a kit, follow these steps:
- Drill holes at your marked points, using a drill bit slightly smaller than the screw's diameter.
- Insert wall plugs (if necessary) and screw the wooden board to the wall.
- Lay the hide on the floor, right side facing up. Position the wooden board along the hide's top edge.
- Wrap the picture hanging wire around the board and hide's edge, ensuring it's secure and taut.
- Lift the hide and hang it on the wall, using the level to ensure it's straight.
Congratulations! Your cowhide is now securely and beautifully hung on your wall. Step back and admire your handiwork. Don't forget, the beauty of cowhides is that they can add a unique, rustic charm to any space. So, have fun decorating around it!