how to ground an outlet in a plastic box

Safe Plastic Box Outlet Grounding: Step-by-Step Guide

By Steven Lee
AD

When it comes to home electrical work, safety should be your top priority. One common task that homeowners often undertake is grounding an electrical outlet in a plastic box. This process is crucial for protecting your appliances and yourself from electrical hazards. In this guide, we'll walk you through the step-by-step process of grounding an outlet in a plastic junction box.

Before we dive into the process, it's essential to understand why grounding is necessary. Grounding provides a low-resistance path for fault current to flow back to the source, preventing shock hazards. Moreover, it helps protect your appliances from damage due to power surges or shorts.

Preparation and Safety Measures

Before you start any electrical work, ensure you follow these safety measures:

AD
How to Wire an Outlet
How to Wire an Outlet
How to ground an old style duplex receptacle outlet box...Part 2
How to ground an old style duplex receptacle outlet box...Part 2
How To Fix An Outlet Box That Sticks Out
How To Fix An Outlet Box That Sticks Out

1. Turn off the Power: Always turn off the power to the circuit you'll be working on at the circuit breaker. Use a non-contact voltage tester to confirm that the power is off.

2. Wear Safe Clothing: Avoid wearing loose, dry clothing that could catch on fire. Opt for cotton clothing and non-slip shoes instead.

Easy Steps for Outlet Grounding
Easy Steps for Outlet Grounding
the corner of a room with wood flooring and an electrical outlet on the wall
the corner of a room with wood flooring and an electrical outlet on the wall

Gather Your Tools and Materials

To ground an electrical outlet in a plastic box, you'll need the following tools and materials:

  • Jigsaw or utility knife (to cut the opening in the box)
  • Wire stripper
  • Needle-nose pliers
  • Screwdriver (flathead or Phillips)
  • Electrical tape
  • Fish tape (optional, for feeding wires through the wall)
  • Cable clamp
  • Grounding wire (12 AWG green or green with yellow stripes)
  • New work box (if replacing an old one)
  • New duplex electrical outlet with ground terminal

Choosing the Proper Box and Outlet

When choosing a plastic junction box, ensure it's suitable for the installation. The box must be the proper size to accommodate the wires and the new outlet, and it should have a knockout that aligns with the studs. Additionally, you'll need a new duplex electrical outlet with a ground terminal.

AD

Prior to starting, check your local building code and regulations to ensure compliance. Always prioritize safety and choose high-quality materials for the best results.

Installing the Box and Feeding the Wires

Now that you have everything you need, let's proceed with the installation:

1. Locate the Studs: Ensure the new box is installed on the studs for proper support. You may need to use a stud finder to locate them.

AD

Cutting the Opening in the Drywall

To cut the opening in the drywall:

  1. Use a jigsaw or utility knife to score the drywall along the lines you've drawn.
  2. Break the scored drywall along the lines to create an opening large enough for the new box.

Box Installation

Installing the box correctly is crucial for a secure connection and safety:

  • Insert the new junction box into the opening you've created.
  • Use screws or nails to secure the box to the studs, ensuring it's level with the surface of the drywall.
  • Tuck excess conduit or wiring behind the box, ensuring it doesn't interfere with the door or cause any strain on the wires.

Running the Ground Wire

The ground wire must be a continuous, bare copper wire that runs from the grounding terminal on the outlet to the grounding bus bar in your panel. To run the ground wire:

AD

Feeding the Wire through the Wall

If you're installing a new outlet, you'll need to feed the ground wire through the wall:

  1. Use a fish tape to create a path for the ground wire to follow through the wall.
  2. Attach the ground wire to the fish tape using electrical tape.
  3. Pull the fish tape gently, feeding the ground wire through the wall and into the new box.

Connecting the Ground Wire

Once the ground wire is in the box, you can connect it to the grounding terminal on the outlet:

  • Strip about 3/4 inches of insulation from the ground wire using a wire stripper.
  • Twist the exposed copper wire using needle-nose pliers to create a tight, spiral shape.
  • Secure the twisted wire to the green grounding terminal on the outlet using a screw.

Wiring the Outlet

The electrical codes require that all electrical work be done with the power off. Before you begin wiring the outlet, ensure the power is still off and test again with a voltage tester.

Stripping the Wires

Strip the wires according to the following guidelines:

  • From the power source, strip 3/4 inches of insulation from the black (hot) and white (neutral) wires.
  • For the ground wire, ensure it's bare or has 1/2 to 5/8 inches of bare copper exposed.

Connecting the Wires

With the wires stripped, connect them to the outlet following these steps:

  1. Connect the black (hot) wire to the brass terminal on the outlet.
  2. Connect the white (neutral) wire to the silver terminal on the outlet.
  3. Connect the ground wire to the green terminal on the outlet.

Securing the Outlet

Secure the outlet in the box using screws. Ensure the outlet is secure and doesn't wobble.

Testing the Outlet

Before using the new outlet, test it to ensure it's working properly:

Testing with a Multimeter or Electrical Tester

Use a multimeter or electrical tester to confirm that the outlet is wired correctly and that there's no power flowing to the ground terminal:

  • Set the multimeter to measure resistance.
  • Touch one probe to the outlet's hot terminal and one probe to the outlet's ground terminal.
  • You should read '∞' or OL (over limit), indicating no continuity between the hot and ground terminals.

With the outlet tested and secured, you can now install the faceplate and use the new outlet safely. Always prioritize safety when working with electricity. If you're unsure about any aspect of the process, consult a professional electrician.

Grounding an outlet in a plastic box may seem intimidating at first, but with careful preparation and the right tools, it's a task you can handle confidently. By following this guide, you'll ensure your home is safe and up to code. Once you gain experience, you'll be well on your way to tackling other electrical projects around the house.

AD