how to get wired internet in another room

How to Extend Wired Internet to Another Room

By Emily Williams
AD

Ever felt frustrated with weak Wi-Fi signals in certain parts of your home? Wired internet might be the solution you're looking for. While it may seem daunting, getting wired internet to another room is not as complicated as it sounds. In this guide, we'll walk you through a comprehensive approach to extend your wired connection, ensuring robust internet access throughout your home.

Before we dive into the process, it's crucial to note that the complexity of the task depends on your home's construction. For instance, older homes might have walls that are harder to drill through, while newer ones with drop ceilings could make the process easier. Understanding your home's structure will help you plan effectively and choose the right tools for the job.

Assessing Your Home's Network Infrastructure

Before running cables, it's essential to assess your current network infrastructure. You'll need to identify the existing router, available Ethernet ports, and any network switches or wireless access points already in place.

AD
an image of a house with two ethernets connected to it and the words easier than u
an image of a house with two ethernets connected to it and the words easier than u
How To Run Ethernet Cable Through House
How To Run Ethernet Cable Through House
Wiring an old house for Ethernet
Wiring an old house for Ethernet

Ideally, you should locate your router or modem in a central location. If it's not, you might want to consider relocating it or using a mesh network system to extend your Wi-Fi coverage. However, for a wired connection, we'll focus on connecting another room directly to your router or network switch.

Gathering the Right Tools and Materials

To get wired internet in another room, you'll need the following tools and materials:

How to Install Home Ethernet - UK Construction Blog
How to Install Home Ethernet - UK Construction Blog
How to Hardwire Your Internet EVEN WITHOUT Ethernet Wiring in Your House!
How to Hardwire Your Internet EVEN WITHOUT Ethernet Wiring in Your House!
  • Cat6 Ethernet cable (the length will depend on the distance between rooms)
  • crayfish fish tape or a networking cable installation kit
  • Drill and appropriate drill bits (depending on your wall type)
  • Wall jacks and faceplates (ensure they match your wall color)
  • Wire strippers
  • Crimping tool and compatible crimp connector
  • Ethernet cable tester (optional, but helpful)

Running the Ethernet Cable

Once you have your tools ready, you're ready to start running the Ethernet cable to the desired room. The process involves the following steps:

1. **Identify the Cable Route**: Plan the route from your router or network switch to the other room. Ideally, the cable should run along the edges of walls, ceilings, or flooring. This will minimize aesthetic impact and keep the cable safe from damage.

AD

2. **Drill Hollow Walls**: For interior walls, you can usually drill through to run cables. Use a stud finder to locate studs and avoid them when drilling. For thicker walls, you might need a larger diameter drill bit.

3. **Feed the Cable Through**: Use a fish tape or networking cable installation kit to feed the Ethernet cable through the newly drilled holes. Be gentle to avoid damaging the cable.

4. **Secure the Cable**: Once the cable is through, secure it along the planned route using trunking, cable clips, or velcro ties. This will keep it organized, safe from damage, and out of sight.

AD

Connecting the Ethernet Cable

With the cable successfully routed to the other room, it's time to terminate it and connect it to your network.

To do this, follow these steps:

Terminating the Ethernet Cable

1. **Strip the Cable**: Stripping the outer jacket of the Ethernet cable will expose the individual twisted pairs that carry the data.

AD

2. **Crimp On Connectors**: Using your crimping tool, attach an RJ45 connector to the exposed twisted pairs. Ensure you follow the correct wiring standard (usually T568B).

3. **Test the Cable**: Use an Ethernet cable tester to verify your connection. If it passes the test, you're ready to plug it in.

Connecting the Cable to Your Network

1. **Install the Wall Jack**: Mount the wall jack where you want the Ethernet port to be. This should be in line with where you secured the cable.

2. **Connect the Cable**: Strip a small amount of the outer jacket from the cable as needed to connect it to the wall jack. Match the twisted pairs to the appropriate color-coding on the jack.

3. **Connect to Your Router or Switch**: Plug the other end of your newly terminated cable into your router or network switch. This should provide a wired network connection to the room.

With these steps complete, you should now have wired internet access in another room. However, always test your connection to ensure everything works as expected. If you face any issues, double-check your connections and ensure that the cable is appropriately secured at all points.

Don't let the fear of a few drilled holes deter you from enjoying robust, lag-free internet throughout your home. With a bit of planning and the right tools, getting wired internet in another room is a rewarding DIY project. So why not give it a try and bid farewell to spotty Wi-Fi once and for all?

AD