how to get rust out of a motorcycle gas tank

How to Remove Rust from Your Motorcycle's Gas Tank

By Christopher Johnson
AD

Discovering rust in your motorcycle's gas tank can be frustrating, but it's not a lost cause. Rust can clog carbs, jets, and fuel lines, causing your bike to run poorly or not at all. This comprehensive guide will walk you through how to get rust out of a motorcycle gas tank, ensuring your ride's longevity and safe operation.

Before diving into the process, understand that this task requires some mechanical knowledge and the right tools. If you're unsure about any step, consult a professional to avoid potential hazards. Let's get started, and remember, patience is key when dealing with rust.

Preparation and Diagnosis

Before you begin, ensure the tank is empty and clean. Drain any remaining fuel and let the tank dry completely. Inspect the tank visually or use a mirror and flashlight to locate the rust. Knowing its extent will help you determine the most effective removal method.

AD
Do-it- yourself Gas Tank Rust Removal
Do-it- yourself Gas Tank Rust Removal
how to remove dents from motorcycle gas tank dent fix how to remove dings parody video
how to remove dents from motorcycle gas tank dent fix how to remove dings parody video
Electrolytic Rust Removal From a Motorcycle Gas Tank
Electrolytic Rust Removal From a Motorcycle Gas Tank

To facilitate the cleaning process, consider removing the tank from the motorcycle. This allows you to access all sides of the tank and ensures a thorough job.

Materials Needed

Gathering the right tools is crucial for a successful rust removal process:

How To Remove Rust From A Motorcycle Gas Tank: NO ACID
How To Remove Rust From A Motorcycle Gas Tank: NO ACID
Restoring an Old Motorcycle and Making It a Cafe Racer!
Restoring an Old Motorcycle and Making It a Cafe Racer!
  • Rust inhibitor and fuel stabilizer
  • Wire brush or coat hanger
  • Rust remover or Dawn dish soap
  • Plasma cutter or die grinder (for severe rust cases)
  • Safety glasses and gloves
  • Rags or old towels
  • Empty fuel container

Choosing the Right Rust Remover

There are several rust removers available on the market, so choose one that caters to your needs:

  • Rigid Rust Remover - A liquid rust converter that changes rust into a black, paintable layer.
  • EvapoRust - A biodegradable, water-based rust remover that foams and eats away at rust.
  • Dawn dish soap - An all-natural, non-abrasive rust remover that can help loosen and lift rust from the tank's surface.

Removing the Rust

Now that you've prepared your workspace and gathered the necessary tools, it's time to tackle that pesky rust.

AD

For minor rust, a wire brush and rust remover should suffice. For severe cases, consider using a plasma cutter or die grinder to remove the rust, ensuring you're careful not to damage the tank.

Method 1: Wire Brush and Rust Remover

1. Apply a rust inhibitor or fuel stabilizer to the outside of the tank to protect it from future rust formation.

2. Pour the chosen rust remover into the tank and swish it around to ensure complete coverage. Follow the product's instructions for specific application guidelines.

AD

3. Let the rust remover sit for the recommended duration, usually between 15 to 30 minutes. During this time, use a wire brush or coat hanger to agitate and loosen the rust. Be careful not to scratch the tank's surface.

4. Once finished, drain the rust remover and any loosened rust from the tank. Rinse the tank thoroughly with clean water.

Method 2: Plasma Cutter or Die Grinder

1. If you have significant rust, you may need to use a plasma cutter or die grinder. These tools can quickly remove rust but require careful handling to avoid damaging the tank.

AD

2. Start with the plasma cutter, using the narrowest tip possible. Carefully cut away the rust, ensuring you don't make any unnecessary holes. If you have a skilled mechanic assisting you, they can use a die grinder with wire or cup brushes to remove rust more quickly.

3. After removing the majority of the rust, switch to a wire brush or coat hanger to clean up any remaining loose rust. Rinse the tank thoroughly with clean water.

Refilling and Final Touches

Before refilling your motorcycle's gas tank, ensure it's completely dry. A damp tank can lead to further rust formation and water in your fuel, causing additional problems.

Mix your chosen fuel stabilizer with fresh gasoline before refilling the tank. This will help prevent future rust and keep your bike running smoothly.

Post-Rust Treatment

1. Treat the inside of the tank with a rust inhibitor to protect it from future corrosion. Remember, prevention is key to maintaining a rust-free gas tank.

2. Check the tank periodically for signs of rust, and address any potential issues promptly to avoid another comprehensive cleaning process.

Congratulations, you've successfully removed rust from your motorcycle's gas tank! Regular maintenance and timely addressing of potential issues will help keep your bike running in top condition. Now, enjoy the satisfaction of a smooth, rust-free ride. Happy riding!

AD