how to get out a broken key in ignition

Emergency Fix: How to Extract a Broken Key From Your Ignition

By James Garcia
AD

Have you ever found yourself in a situation where your key broke off in your car's ignition, leaving you stranded? It's a frustrating experience, but don't worry, you're not alone. This happens more often than you might think. The good news is, there are several methods you can try to remove a broken key from your ignition. Let's explore a few techniques to help you get back on the road as soon as possible.

Before we proceed, remember that if your key breaks off completely, there's often no way to retrieve it without professional help. However, if there's a part of the key still sticking out, you can try the following methods. Always be careful when trying these techniques to avoid causing further damage to your ignition or the key itself.

Preparation

Before you begin, gather some tools that might come in handy. You'll likely need tweezers, pliers, or needle-nose pliers, a small flathead screwdriver, super glue, and possibly some squirt bottles or syringes. Also, ensure you're working in a well-lit area and are dressed appropriately, as this might get a bit messy.

AD
Why Car Key Gets Stuck in Ignition? Causes and Fixes
Why Car Key Gets Stuck in Ignition? Causes and Fixes
How to Diagnose an Ignition Key That Won’t Turn | YourMechanic Advice
How to Diagnose an Ignition Key That Won’t Turn | YourMechanic Advice
Car Hacks | Revive Your Ford! DIY | Starting a Ford with a Broken Key or Ignition Lock Cylinder
Car Hacks | Revive Your Ford! DIY | Starting a Ford with a Broken Key or Ignition Lock Cylinder

For safety reasons, make sure your car is in a safe, comfortable place where you can work undisturbed. It's also a good idea to have someone with you in case of emergencies. Now, let's move on to the methods you can try to remove a broken key from your ignition.

Using Tweezers or Pliers

If there's a significant portion of the key still visible, tweezers or pliers might be your best bet. Start by trying to grip the broken piece with your tool of choice. It might be helpful to straighten out the key as much as possible before you start, using a pair of pliers or by applying steady pressure with your fingers. Once you've gripped the key, rotate it gently in the unlock direction, then gently pull it towards you.

HOW TO REMOVE KEY STUCK IN IGNITION - EASIEST 2 MINUTE FIX!
HOW TO REMOVE KEY STUCK IN IGNITION - EASIEST 2 MINUTE FIX!
Car Ignition Repair
Car Ignition Repair

It might take some patience and a delicate touch, but with a bit of luck, you should be able to pull the broken key out of the ignition. If it doesn't seem to be budging, move on to the next method. Remember, too much force could cause more damage or make the key even harder to retrieve.

Using a Small Flathead Screwdriver

If you've been unsuccessful with tweezers or pliers, a small flathead screwdriver might do the trick. Insert the screwdriver into the keyhole as far as you can without damaging the switch. Try to position the tip of the screwdriver against the edge of the broken key. Gently apply pressure and try to work the key out of the ignition.

AD

You might find it helpful to rotate the screwdriver slightly as you push and pull, working the key out inch by inch. Be very careful not to apply too much pressure, as this could damage the ignition switch or cause the key to break even further into the ignition.

Using Liquids to Lubricate and Retrieve the Key

If you've tried the previous methods without success, it might be time to bring in some liquid assistance. WD-40 is a popular choice for this task, as it can both lubricate the key and break down any rust or corrosion that might be hindering its removal. Alternatively, you can use commercial lubricants, such as Pam or other cooking sprays, which can be effective in loosening the key.

To use a liquid method, first, disassemble the ignition cylinder if possible, to give yourself better access to the broken key. Then, squirt some liquid into the keyhole and around the edges of the broken key. Allow the liquid to sit for a few minutes, then try again with your tweezers or pliers. If the key still won't budge, you might need to try a more forceful approach.

AD

Using a Pincher Tool or Lockout Tool

If you have access to a pincher tool or a lockout tool designed for retrieving broken keys, these can be very effective. A pincher tool is designed with long, narrow jaws that can grip and extract small objects, while a lockout tool is specifically designed to remove broken keys from locks and ignitions. Follow the manufacturer's instructions for the best results.

Using these tools requires a certain level of skill and caution. Be sure to take your time and use the tool delicately to avoid causing further damage to the key or the ignition.

Using Super Glue to Bond the Key Pieces

If you have access to super glue, this can be an effective way to remove a broken key from an ignition. The key pieces still have jagged edges that can make a strong bond with the glue, allowing you to extract the key as a single piece. Apply a small amount of super glue to the exposed portion of the key, then use tweezers or pliers to press the broken pieces together.

AD

Hold the key pieces together for a few seconds to allow the glue to set, then try to extract the key using your chosen tool. Be very careful not to use too much glue, as this could make a mess of your ignition and be difficult to clean up.

If none of the above methods work, or if you're unsure about attempting any of them, it's time to call a professional. A qualified locksmith can use specialized tools and techniques to extract the broken key from your ignition, ensuring no further damage is done to your car.

Remember, prevention is always the best cure. To avoid breaking your key in the ignition in the future, ensure your key is in good condition and never forced. Always insert your key smoothly and rotate it gently. If you notice any resistance, stop and try again, or consider having your ignition serviced.

In the event of a broken key, stay calm and try one of the methods above. With a bit of patience and the right tools, you should be able to retrieve your key and get back on the road. If all else fails, don't hesitate to call a professional for help. Until next time, happy driving!

AD