how to get bubbles out of drywall mud

Removing Bubbles from Drywall Mud: A Comprehensive Guide

By Sarah Taylor
AD

So, you've spent hours applying joint compound to your drywall, only to find tiny bubbles forming as it dries. Don't despair! Here's how to get bubbles out of drywall mud and achieve a smooth, even finish.

First, let's understand why bubbles form in drywall mud. Common reasons include applying the mud too thickly, mixing it incorrectly, or working in humid conditions. Now, let's dive into how to fix this issue.

Identifying and Addressing the Cause

Before tackling the bubbles, identify the root cause to prevent them from recurring.

AD
BUBBLES IN DRYWALL MUD!!!
BUBBLES IN DRYWALL MUD!!!
How to Repair Drywall Paper Bubbles | Detailed Explanation (2026)
How to Repair Drywall Paper Bubbles | Detailed Explanation (2026)
How to Prevent Bubbles in Drywall Tape?
How to Prevent Bubbles in Drywall Tape?

Here are two key sub-causes to investigate:

Incorrect Mixing

Over- or under-mixing joint compound can cause bubbles. To avoid this, follow the manufacturer's instructions precisely when mixing.

a man is painting the wall with no bubbles easy sanding
a man is painting the wall with no bubbles easy sanding
Drywall tape - loose, bubbles or wrinkled | Buyers Ask
Drywall tape - loose, bubbles or wrinkled | Buyers Ask

Over-mixing introduces too much air into the compound, leading to bubbles. Conversely, under-mixing leaves dry powder that traps air as it hydrates, again forming bubbles.

Humidity and Thickness

High humidity levels and excessive joint compound thickness can also lead to bubbling.

AD

To combat these issues, ensure your work area is well-ventilated and maintain a moderate temperature. Also, apply the compound in thin, even coats to allow it to dry properly.

Removing Bubbles from Drywall Mud

Now that you've identified and addressed the cause, it's time to remove the bubbles.

Here are two effective methods to consider:

AD

Poking and Sanding

Use a pointed tool, like a thin screwdriver or awl, to gently poke the bubbles. This releases the air trapped inside.

After poking the bubbles, sand the area with fine-grit sandpaper (120-220 grit) to smooth it out. This will also help remove any slightly raised areas left by the bubbles.

Applying a Second Coat

If the bubbles are small and haven't yet burst, you can sometimes smooth them out with a second, thin coat of joint compound.

AD

Apply the second coat using a joint knife, ensuring it's thin enough to dry quickly and evenly. Sand any remaining bubbles or imperfections after it dries.

Remember, prevention is key. By maintaining a well-ventilated work area, applying thin, even coats, and mixing the compound correctly, you can minimize the risk of bubbles forming. Happy mudding!

AD