how to get a stuck cv axle out

Stuck CV Axle Removal: Step-by-Step Guide

By Brian Robinson
AD

Picture this: You're speeding down the highway, radio blasting, when suddenly, your car starts making alarming noises and jolts to a halt. A quick inspection reveals the problem - your CV axle is stuck. Don't let this minor hiccup derail your plans. With the right techniques and some elbow grease, you can get that stuck CV axle out and be back on the road in no time. Let's dive in.

Diagnosing a Stuck CV Axle

Before you roll up your sleeves, you need to confirm that the CV axle is indeed the problem. A stuck CV axle will often present with:

AD
How to Remove a Stuck CV Axle - Simple
How to Remove a Stuck CV Axle - Simple
How to Replace a CV Axle in Your Car
How to Replace a CV Axle in Your Car
Can A Cv Axle Go Bad Without Leaking
Can A Cv Axle Go Bad Without Leaking
  • Clicking or clunking noises from the wheel area, especially when turning.
  • Vibration in the steering wheel, possibly accompanied by shaking or wobbling.
  • Abnormal tire wear, which could indicate a damaged CV joint.

Checking for Play

To confirm it's the CV joint, perform a simple test:

1. Jack up the vehicle and secure it with jack stands. 2. Grab the top of the tire at the 12 o'clock position and pull it towards you. 3. If there's play in the CV joint, you'll feel the tire move - that's a clear sign your CV axle is stuck.

Removing a Stuck CV Axle Inner Joint
Removing a Stuck CV Axle Inner Joint
1.6K reactions · 19 shares | 🔧 Remove a Stuck CV Axle in UNDER 60 Seconds! #mechanic #automotive #mechanics #carguys #auto #mechaniclife #autotechnician #autorepair | GearHeadBryan | Facebook
1.6K reactions · 19 shares | 🔧 Remove a Stuck CV Axle in UNDER 60 Seconds! #mechanic #automotive #mechanics #carguys #auto #mechaniclife #autotechnician #autorepair | GearHeadBryan | Facebook

Inspecting the CV Boot

While you're at it, check the CV boot. If it's torn or damaged, the CV joint is likely contaminated with dirt and water, causing it to seize up. If the boot is fine, the problem might be a seized CV joint or a worn-out axle.

Preparing to Remove the Stuck CV Axle

Before you start, gather your tools: a jack, jack stands, a breaker bar, sockets, wrenches, a pry bar, and maybe some penetrating oil. Safety first: make sure the vehicle is securely supported and won't move. Put on safety glasses and gloves.

AD

You may also want to spray some penetrating oil on theCV joint and axle to help loosen things up. Give it time to work - at least 30 minutes. If the axle is still stuck, you might need to resort to more drastic measures, like heating the area with a propane torch or using a pickle fork (see below).

Heating the Axle

Applying heat can help expand the metal and loosen the seized joint. Use a propane torch, holding the flame a few inches away from the axle for about 10-15 minutes. Be careful not to overheat it, as that could warp the metal.

Using a Pickle Fork

If heating doesn't work, you can use a pickle fork to break the seized joint. This tool has two prongs that fit into the CV joint. Push the axle with a breaker bar while someone operates the pickle fork. Be prepared for some force - it might take a while to break the joint free.

AD

Removing the Stuck CV Axle

Now that you've loosened the stuck CV axle, it's time to remove it. Before you start, make note of how the axle and cv joint are positioned, so you can put it back together correctly.

Using a breaker bar and socket, loosen and remove the CV axle nut. You might need to use an impact wrench if it's really tight. Once the nut's off, you can use a pry bar or a large screwdriver to push the axle out from the differential side. With any luck, it should come out with some persuasion.

Removing the Vega-Blocker

Some vehicles have a vega-blocker on the CV axle, designed to prevent the axle from rotating in the CV joint. If your vehicle has one, you'll need to drill it out or cut it off before you can remove the axle. Be careful not to damage the axle itself.

AD

Replacing the CV Axle

Once the stuck CV axle is out, compare the new axle to the old one to ensure they're identical. Grease the new axle's CV joint with high-quality CV joint grease, then insert it into the differential. Reverse the removal process to install the new axle, using a torque wrench to tighten the nut to the manufacturer's specified torque.

Finally, take your vehicle for a test drive to ensure everything's working correctly. You're back on the road, ready for the next adventure!

AD