Fix LG Washer UE Code: Step-by-Step Guide
Ever encountered the dreaded "UE" error on your LG washer? Don't let this cryptic code ruin your laundry day. This guide will walk you through understanding and troubleshooting this error to get your washer back in action.
The "UE" error on an LG washer often indicates a problem with the water pressure or inlet valve. Before you dive into any repairs, ensure your washer is connected to a water source and the faucets are fully open. If the issue persists, let's explore possible solutions.
Checking Water Inlets and Valves
Inspecting the water inlets and valves is a crucial first step. The "UE" error could be due to a partially closed or faulty inlet valve, or even a kinked or crushed water supply hose.
First, locate the water supply hoses behind your washer. Ensure these hoses are securely attached to both the washer and the water faucets, and are not kinked or crushed. If you find any issues, fix or replace the hoses as needed.
Inspecting the Inlet Valve
Next, locate the inlet valve on your LG washer. It's usually situated near the back of the machine. Disconnect the wire harness connected to the inlet valve, then use a multimeter to test the valve's resistance. If the resistance is outside the specified range (as per your washer's repair manual), the valve should be replaced.
To replace the inlet valve, first shut off the water supply and disconnect the water hoses. Remove the old valve and install the new one, ensuring it's properly secured in place. Reattach the water hoses and wire harness, then turn on the water supply.
Examining the Water Pressure
The "UE" error can also signify low water pressure. To check this, retrieve your multimeter again and measure the water pressure at the hot and cold water inlet valves. The ideal pressure should range between 20 to 80 PSI. If the pressure falls below this range, consult your local plumber to investigate the cause.
Moreover, a water supply issue might also cause the "UE" error. Ensure that the faucets are fully open and there are no shutoff valves between the faucets and the washer that may be partially closed.
Resetting the Control Board
Sometimes, a simple reset of the control board can resolve the "UE" error. Unplug the LG washer from the power source, wait for about 60 seconds, then plug it back in. If this doesn't solve the issue, proceed to the next step.
Cleaning the LID Switch
The LID switch might cause the "UE" error if it's dirty or malfunctioning. This switch signals the washer that the lid is properly closed. To clean it, locate and remove the switch, then use a suitable cleaner to wipe its contacts. Reassemble the switch and test the washer.
If the LID switch is beyond cleaning and needs replacement, consult your washer's repair manual for the exact model and follow the instructions to replace the switch safely.
By carefully inspecting and troubleshooting these components, you should be able to resolve the "UE" error on your LG washer. If none of these solutions work, it might be time to consult a professional for further diagnosis and repair. Happy fixing!