how to fix troy bilt lawn mower

How to Fix Troy-Bilt Lawn Mower

By Melissa Wilson
AD

If your Troy-Bilt lawn mower has sputtered to a halt, don't let grass growth overtake your neat lawn. Take control, roll up your sleeves, and fix your mower with these step-by-step solutions.

Before diving in, ensure your mower is cool, clean, and sitting on a flat surface. Also, prepare your toolkit with a socket wrench, screwdriver, pliers, and a wire brush for scrubbing.

Fuel-related Issues

For many machines, fuel problems are a common culprit. Let's examine the fuel system step by step.

AD
Lawn Mower Won’t Start: Troy Bilt TB230
Lawn Mower Won’t Start: Troy Bilt TB230
Troy-Bilt Lawn Mower Repair – How to replace the Blade Adapter
Troy-Bilt Lawn Mower Repair – How to replace the Blade Adapter
Troy Bilt Lawn Mower Won't Start | TB110 Won't Start
Troy Bilt Lawn Mower Won't Start | TB110 Won't Start

Start by checking if your mower is using the right type of fuel. Troy-Bilt mowers usually require unleaded gasoline with an 87 octane or higher.

Inspecting the Fuel Cap and Line

First, remove the fuel cap to ensure it's clean and tight-fitting. Then, examine the fuel line for any kinks, wear, or cracks.

Troy bilt super bronco riding mower
Troy bilt super bronco riding mower
Reasons Why Your Troy Bilt Lawn Mower Won’t Start
Reasons Why Your Troy Bilt Lawn Mower Won’t Start

If anything seems amiss, replace the affected component. Ensure the fuel line is properly secured and reseal the fuel cap.

Checking and Cleaning the Carburetor

Over time, carburetors can clog with fuel residue. If your mower struggles to start, this could be the issue.

AD

First, remove the carburetor and soak it in a specialized cleaner like carburetor cleaner. Once cleaned and dried, reassemble and reinstall it. If the problem persists, consider seeking a professional's advice.

Air and Spark related Problems

Problems with your mower's air or spark could also lead to poor performance.

Begin by inspecting the air filter. If it's clogged with dirt, replace it with a new one or clean it according to the manufacturer's instructions.

AD

Checking the Spark Plug

Next, examine your spark plug. Remove it and check for spark. You can do this by holding it close to the engine block and attempting to spark it with the ignition on.

If there's no spark, replace the plug with a new one. Reassemble and try starting your mower. If it starts but quickly dies, you might need to adjust the carburetor.

Inspecting the Engine's Compression

Finally, check your mower's engine compression. If it's low, it might be due to worn-out cylinder or piston rings.

AD

Addressing this issue typically involves an engine rebuild, which may require professional help.

Regular maintenance is key to prevent many of these problems in the first place. Be sure to clean your mower after each use, change the oil regularly, and always use fresh fuel.

AD