how to fix the spring in a stapler

How to Fix a Sagging Spring in Your Stapler

By Matthew Lopez
AD

Is your once-reliable stapler now failing to deliver that satisfying 'clunk'? Don't rush to the store just yet. With a little patience and the right tools, you can learn how to fix the spring in a stapler and breathe new life into your office staple solution. Let's dive into a step-by-step guide to help you tackle this simple yet effective DIY repair.

Before we begin, ensure you have a few essential tools at hand: a Phillips-head screwdriver, a flathead screwdriver, needle-nose pliers, and a steady hand. Now, let's get started!

Diagnosing the Issue

First, you need to identify the underlying problem. The most common issue with Stapler Springs is that they become loose or misaligned over time, which can lead to staples not being fired properly.

AD
Stapler Spring Replacement
Stapler Spring Replacement
How to Replace a No-Sag Spring - Pro Tips!
How to Replace a No-Sag Spring - Pro Tips!
How to Fix Stapler Spring: A Step-by-Step Guide - Tool Trip
How to Fix Stapler Spring: A Step-by-Step Guide - Tool Trip

To diagnose the issue, open your stapler and observe the spring. Check if it's secured correctly and nip any loose ends, if any, using your needle-nose pliers.

Dismantling Your Stapler

To access the spring, you'll need to take your stapler apart. Use your Phillips-head screwdriver to unscrew the back plate, revealing the internal workings. Keep these screws safe as you'll need them later.

How stapler is made - material, manufacture, making, used, parts, components, dimensions, product
How stapler is made - material, manufacture, making, used, parts, components, dimensions, product
Upholstery Staplers. Air and Electric staple guns.
Upholstery Staplers. Air and Electric staple guns.

Next, carefully pry off the outer casing using your flathead screwdriver. Again, ensure you don't damage any parts. Now, you should have a clear view of the springs and gears inside.

Locating the Problematic Spring

The spring you're looking for is typically found near the base, attached to the anvil – the plate that staples bend against. It should be wound tightly around a post and secured with a clip or rivet.

AD

Upon inspection, you might find the spring is indeed loose or uncoiled. Alternatively, the clip or rivet that holds it in place might have become detached or damaged.

Fixing the Spring

If the spring is merely loose, you can usually re-secure it by bending the retaining clip back into place using your needle-nose pliers. However, if the spring is frayed, kinked, or broken, you'll need to replace it.

For misaligned springs, straighten it using pliers, ensuring it remains taut against the post.

AD

Replacing the Spring

To replace the staple spring, you'll need to source a compatible replacement part. You can usually find these online or at office supply stores.

Once you have your new spring, align it with the post and secure it using the retaining clip or rivet. If the latter is damaged, use a rivet tool or a bent paperclip to create a new one.

Reassembling Your Stapler

After fixing or replacing the spring, carefully reverse the dismantling process. Ensure all parts are aligned correctly and reattach the outer casing and back plate using the original screws.

AD

Once reassembled, test your stapler to ensure the spring is working correctly. You should now hear that satisfying 'clunk' sound again.

While fixing a stapler spring might seem daunting at first, it's an easy task with the right know-how. Remember, patience is key, and always take your time when working with small parts. Happy fixing!

AD