how to fix sun damaged plastic on car

"Revive Your Ride: How to Repair Sun Damaged Plastic on Your Car"

By Michael Anderson
AD

Has your car's plastic trim seen better days? Sun damage can wreak havoc on plastic surfaces, leaving them faded, cracked, or warped. But fear not, car enthusiasts! With the right techniques and some elbow grease, you can restore your vehicle's plastic to its former glory. Let's dive into how to fix sun damaged plastic on your car.

Sun damage occurs when UV rays break down the chemical bonds in plastic, causing it to degrade. The good news is, many modern cars use UV-resistant plastic, which slows down this process. However, no plastic is entirely immune to sun damage over time. In this guide, we'll cover effective methods to rejuvenate and protect your car's plastic from pooled resentment of harmful UV rays.

Understanding Sun Damage: Symptoms and Causes

Before you embark on your DIY repair journey, it's crucial to understand the signs of sun damage and what causes it. Sun damaged plastic typically exhibits the following symptoms:

AD
4 Ways To Restore Dull And Faded Black Plastic Trim
4 Ways To Restore Dull And Faded Black Plastic Trim
How To Restore Plastics on Car
How To Restore Plastics on Car
How to fix SUN DAMAGED / FADED paint (peeling clear coat)
How to fix SUN DAMAGED / FADED paint (peeling clear coat)

1. Discoloration: The plastic becomes faded or yellowish, losing its original color and sheen. This is caused by the breakdown of color pigments under prolonged sun exposure.

2. Cracking and Splitting: As the plastic's molecular structure weakens, it becomes brittle and prone to cracking, especially in hot temperatures.

a car with the words it isn't as hard as you think it is so do it
a car with the words it isn't as hard as you think it is so do it
How to renew faded plastic
How to renew faded plastic

3. Warping: Prolonged heat can cause the plastic to expand and contract, leading to warping or distortion over time.

Identifying Sun Damaged Plastic on Your Car

Inspect your car's exterior for any plastic components that have been exposed to direct sunlight for extended periods. Common suspects include:

AD
  • Bumper covers
  • Door handles
  • Headlight and taillight housings
  • Moldings and trims
  • Fender flares

Assessing the Severity of Sun Damage

Before you start any repairs, assess the severity of the damage. Gouges, deep cracks, or extensive warping may require professional help or replacement of the plastic part. For minor to moderate sun damage, however, the following methods should restore your car's plastic to a satisfactory condition.

Preparing the Surface: Cleaning and Sanding

Before applying any remedies, ensure the plastic surface is clean and free of contaminants. This allows for better adhesion of any products you'll apply later.

Start by washing the affected area thoroughly with car wash soap and warm water, followed by a thorough rinse to remove any residue. Next, dry the surface completely to avoid water spots.

AD

Sanding: Removing the Damaged Layer

Lightly sanding the sun damaged area helps remove the compromised outer layer of plastic, exposing a fresh surface for better absorption of your chosen repair product. Use a fine-grit sandpaper (around 1200-2000 grit) and follow these steps:

  1. Wet-sand the surface using a sanding block or orbital sander to ensure even pressure.
  2. Move the sandpaper in straight lines, following the direction of the molded plastic.
  3. Rinse and dry the surface after sanding to remove any sanding dust.

Wipe Down: Removing Sanding Residue

After sanding, wipe the surface with a tack cloth or a clean, lint-free cloth dampened with denatured alcohol to remove any remaining sanding residue. This step helps ensure optimal adhesion of the repair products.

Repairing Sun Damage: Products and Techniques

Once the plastic surface is clean and prepared, it's time to restore it to its former glory. Several products and techniques can help you achieve this, as detailed below.

AD

Plastic Restorer and Dye

Plastic restorer and dye products are designed to rejuvenate and color-match plastic surfaces. They work by re-pigmenting the plastic and replenishing its molecular structure, providing UV protection and a like-new appearance. Follow these steps when using a plastic restorer and dye:

  1. Shake the product well before use.
  2. Apply a thin, even coat using a foam or bristle applicator, following the direction of the molded plastic.
  3. Allow the product to dwell for the recommended time (usually 15-30 minutes), then wipe off any excess with a clean, lint-free cloth.
  4. Repeat the application process if necessary to achieve the desired color and finish.
  5. Buff the surface with a clean, soft cloth to restore its gloss.

Plastic Welding and Filler

For more severe cases, such as deep cracks or gouges, consider using a plastic welding kit or a plastic filler designed for automotive use. These products help repair structural damage and create a smooth, flush surface that can be painted or colored.

Here's a brief overview of the process:

  1. Clean and prep the surface as previously described.
  2. Following the kit's instructions, apply the filler or weld material to the damaged area, filling gaps and cracks.
  3. Allow the product to cure for the recommended time.
  4. S неп the surface using progressively finer grit sandpaper (starting with 800-1200 grit and finishing with 2000-3000 grit).
  5. Wipe down the surface with a tack cloth or denatured alcohol.
  6. Apply the desired finish - coloring, painting, or a plastic restorer - and buff to a gloss.

Plastic Paint: Adding a Shining Touch

For a long-lasting, professional look, apply matching paint to your repaired plastic. Use a plastic-compatible primer, paint, and clear coat designed for your specific type of plastic (e.g., PP, ABS, or PC). Follow these steps:

  1. Sand and clean the repaired surface as described earlier.
  2. Apply a light, even coat of primer, following the direction of the molded plastic.
  3. Allow the primer to dry for the recommended time, then lightly sand the surface with a fine-grit sandpaper (2000-3000 grit).
  4. Wipe down the surface with a tack cloth or denatured alcohol.
  5. Apply several thin coats of matching paint, allowing each coat to dry and lightly sanding between coats (if recommended).
  6. Apply a clear coat to protect the paint and provide additional UV resistance.
  7. Buffer the surface to a glossy finish.

Protecting Your Car's Plastic: Preventive Measures

Now that you've restored your car's plastic to its former glory, it's essential to protect it from future sun damage. Implement these preventive measures:

Park in the Shade

Whenever possible, park your car in a garage or shaded area, such as under a tree or a carport.

Apply UV-Protectant Sprays and Coatings

Regularly apply a UV-protectant spray or coating to your car's plastic surfaces to provide an added layer of sun protection. Opt for products with built-in cleaners and protective agents for easier application and better results.

Regularly Clean and Inspect

Keep your car's plastic surfaces clean and inspect them regularly for signs of sun damage. Early intervention can prevent minor damage from progressing into a more significant repair.

Congratulations! You've triumphantly conquered sun damage on your car's plastic surfaces. With consistent care and protection, you can maintain your vehicle's youthful appearance and extend the life of its plastic components. Now, go forth and enjoy the sunshine, worry-free!

AD