how to fix stove igniter

How to Fix Stove Igniter

By Matthew Clark
AD

Is your stove refusing to light? Chances are, the issue is with your stove's igniter. A faulty igniter could be due to dirt, debris, or even a simple power supply issue. Don't worry, fixing a stove igniter is a task you can tackle yourself. This guide will walk you through the process, ensuring your stove is back in action in no time.

Before you begin, ensure you've turned off the stove's power supply. Safety first! Locate your stove's breaker box and turn off the relevant circuit. If your stove is gas-powered, ensure the gas supply is turned off as well.

Inspecting Your Stove Igniter

The first step is to inspect your stove's ignition system. This involves checking your igniter, main control board, and theówires connecting them.

AD
How to Replace a Gas Range Spark Igniter.
How to Replace a Gas Range Spark Igniter.
How to Fix a Stove Burner That Won't Light in 60 Seconds
How to Fix a Stove Burner That Won't Light in 60 Seconds
How To Fix A Gas Stove Igniter That Won't Stop Clicking
How To Fix A Gas Stove Igniter That Won't Stop Clicking

Start by removing the stove's control panel. The exact process may vary by model, but usually, this involves unscrewing a few screws and gently pulling the panel away from the stove.

Checking the Igniter

The igniter is typically found near the burner element. It's a small, L-shaped rod made of platinum or a similar heat-resistant material. You can use a multimeter to test the igniter's resistance. It should read between 4-8 Ohms. If it's out of range, it's likely faulty and needs replacing.

a woman taking a photo of an oven with the words, no spark? how to replace your spark module
a woman taking a photo of an oven with the words, no spark? how to replace your spark module
a close up of a metal object with red light coming from it's side
a close up of a metal object with red light coming from it's side

If the igniter checks out, the issue might be with the control board or wires. Use your multimeter to test the continuity of the wires leading to and from the igniter. If there are any broken or frayed wires, they'll need replacing.

Testing the Control Board

If the igniter and wires are in good shape, the problem could be with the control board. Test the board using your multimeter. If it's not functioning correctly, you'll need to replace it. Be sure to get the correct replacement part for your specific stove model.

AD

Before you proceed to replacement, ensure you've identified the exact cause of the problem. Faulty parts can be expensive, and it's crucial to buy the right one the first time.

Replacing Your Stove Igniter

Once you've identified the faulty part, it's time to replace it. Remember to keep safety in mind throughout this process.

For igniter replacement, start by removing the screws holding the igniter in place. Disconnect the wires leading to and from the igniter. Once the igniter is loose, gently pull it out of its slot. Take note of its position, as this will help you install the new one correctly.

AD

Installing the New Igniter

Before installing the new igniter, clean the area around the slot to ensure there's no debris that could interfere with the new igniter's function. Once the area is clean, insert the new igniter into the slot, making sure it's securely in place.

Reconnect the wires leading to and from the igniter, ensuring they're fully seated and secure. Replace any screws you may have removed during the process. Test your stove to ensure the igniter is working correctly.

Replacing the Control Board

If the control board is the problem, the process is a bit more involved. Start by disconnecting the wires leading to and from the board. Remove any screws holding the board in place.

AD

Once the old board is removed, install the new board, reconnecting the wires as you go. Be sure to match the wires to their corresponding locations on the new board. Test your stove to ensure the new board is functioning correctly.

And there you have it! Your stove should now be working as good as new. Regular cleaning and maintenance of your stove will help prevent future igniter issues. Always ensure your stove is turned off and allowed to cool before performing any maintenance tasks.

AD