how to fix stairs that are too steep

"Streamline Your Home: Managing Steep Staircases: DIY Solutions"

By Steven Jackson
AD

Steep stairs can be a safety hazard, but they don't have to stay that way. Fixing stairs that are too steep involves a few steps, pardon the pun, of careful measurement, planning, and execution. With the right tools and techniques, you can make your stairs safer and more comfortable to use. Let's dive into how you can do this.

First, it's essential to understand why stairs become too steep. This can happen due to incorrect initial construction, wear and tear over time, or changes in the home's layout. Whatever the reason, steep stairs can lead to accidents, make it difficult for some individuals to use, and even devalue your property. So, grab your safety glasses, and let's start the transformation.

Assessing the Situation

Before you start any work, it's crucial to assess the current state of your stairs. Check for any signs of damage, such as broken steps, loose railings, or wobbly posts. This step is not just about safety but also helps you understand the extent of the work needed.

AD
Steep Bungalow Stairs – how to make them less so…
Steep Bungalow Stairs – how to make them less so…
How Do I Fix My Stairs That Are Dangerously Steep? - Hunker
How Do I Fix My Stairs That Are Dangerously Steep? - Hunker
Stairs and How they Work
Stairs and How they Work

Measure the rise and run of your stairs. The rise is the vertical distance from the top of one step to the top of the next. The run is the horizontal distance from the nosing of one step to the nosing of the next. These measurements will determine if your stairs are indeed too steep. The ideal ratio of rise to run is about 1:7 or 1:8, with a maximum rise of 7 inches (178 mm) and a minimum tread depth of 9 inches (229 mm). If your stairs don't meet these standards, you've got some leveling to do.

Tools Needed

To fix your steep stairs, you'll need a level, a tape measure, pencil, chalk line, circular saw, level, carpenter's square, and, if you're adding risers, spacers or shims, and lumber. Safety gear like safety glasses, work gloves, and a dust mask are also a must.

Fixing Stairways with Smaller Steps Might Be More Difficult to Repair Than You Think
Fixing Stairways with Smaller Steps Might Be More Difficult to Repair Than You Think

You might also need assistance, especially if you're modifying the stringers or adding risers. It's always better to have an extra pair of hands when working with heavy or awkwardly shaped pieces of wood.

Planning the Fix

Based on your measurements, you'll need to decide how you're going to fix your stairs. If your risers and treads are interchangeable, you might be able to just switch them around. If not, you'll need to modify your stringers, rebuild your stairs, or add risers.

AD

Drawing a diagram of your plan can be helpful. This can also help you visualize how your stairs will look when the work is done and make any necessary adjustments before you start cutting and nailing.

Fixing Your Stairs

Now that you've assessed your stairs, gathered your tools, and planned your approach, it's time to get to work. Remember, safety first. Wear your safety gear and make sure you understand how to use your tools safely.

If you're simply switching risers and treads, the work is relatively straightforward. If you're altering your stringers, rebuilding your stairs, or adding risers, the process is more complex but still doable with patience and careful attention to detail.

AD

Modifying Stringers

Modifying stringers involves cutting deeper notches to accommodate shorter risers. This can make your stairs safer and more comfortable to use. To do this, you'll need to measure and mark the new notch depth, cut the notch with a circular saw, and then install the new riser. Keep in mind that modifying stringers can weaken them, so you'll need to reinforce them with backing blocks or sister joists.

It's important to note that modifying stringers can be more complex than other methods, and it may not be suitable for all types of staircases. If you're not sure, it might be best to consult a professional.

Rebuilding Your Stairs

Rebuilding your stairs involves completely dismantling them and rebuilding them with new risers and treads. This is a more involved process, but it ensures that your stairs are structurally sound and safe. To rebuild your stairs, you'll need to remove the old treads and risers, measure and cut the new treads, attach them to the stringers, install the new risers, and secure them in place.

AD

Rebuilding your stairs may also involve modifying or replacing your stringers, depending on their condition.

Adding Risers

Adding risers is the simplest way to fix steep stairs. Risers are the vertical boards that fill in the space between treads. By adding risers, you decrease the rise of each step, making your stairs safer and more comfortable to use. To add risers, measure and cut them to fit, then attach them to the underside of the treads and the nosing of the next tread up.

Adding risers can be a great solution if your stairs are only slightly too steep, or if the risers and treads are interchangeable. However, if your stairs are significantly too steep, this method may not be sufficient on its own.

Regardless of the method you choose, always double-check your measurements and take your time. Remember, this is a job that can impact the safety and functionality of your home, so it's important to get it right. If you're unsure about any part of the process, don't hesitate to consult a professional.

Once your stairs are fixed, it's a good idea to give them a fresh coat of paint or stain to protect the wood and enhance their appearance. You might also consider adding a nonslip surface to your treads for added safety.

Now that you've learned how to fix stairs that are too steep, you can make your home safer and more comfortable for everyone who uses it. So, grab your tools, and get to work. Your stairs won't fix themselves, after all. Happy building!

AD