how to fix samsung dryer belt

Samsung Dryer Belt Replacement & Repair: Step-by-Step Guide

By Anthony Lewis
AD

Is your Samsung dryer running but not tumbling? It's possible that your dryer belt has snapped or slipped off, causing this inconvenience. While it's always recommended to hire a professional for repairs, fixing a dryer belt at home is possible with the right guidance. Let's explore how to diagnose and repair this issue step by step.

Before starting, ensure you have the correct tools and parts. You'll need a new dryer belt (make sure it matches your Samsung dryer model), a flathead screwdriver, a Phillips screwdriver, and maybe a hammer and a putty knife. Don't forget to unplug your dryer from the power source before starting any work.

Diagnosing the Issue

The first step is to determine whether your dryer belt is indeed the culprit. Here's how:

AD
Samsung Dryer Belt Replacement - Not Spinning or Starting
Samsung Dryer Belt Replacement - Not Spinning or Starting
Quick Fix: How to replace the Drive Belt in Your Samsung Dryer (Fixes Not Tumbling) Part 6602-001655
Quick Fix: How to replace the Drive Belt in Your Samsung Dryer (Fixes Not Tumbling) Part 6602-001655
Dryer Runs but Drum Won't Spin? Replace the Belt — Samsung (6602-001655)
Dryer Runs but Drum Won't Spin? Replace the Belt — Samsung (6602-001655)

1. Inspect the belt visually. If it's broken, frayed, or badly worn out, it's likely the cause of the problem.

2. If the belt looks alright, try to spin the dryer drum manually using the small slot on the front. If it's very hard to spin, or there's unusual resistance, the belt might have slipped off its pulleys.

Samsung Clothes Dryer - How To Inspect Drum Belt & Check Condition - Remove Top Cover - DIY
Samsung Clothes Dryer - How To Inspect Drum Belt & Check Condition - Remove Top Cover - DIY
Samsung Dryer Loud Noise Fix (belt idler pulley replacement)
Samsung Dryer Loud Noise Fix (belt idler pulley replacement)

Replacing a Broken Belt

If your belt is broken or worn out, replacing it is straightforward:

1. Remove the dryer's front panel using a Phillips screwdriver. The exact procedure varies somewhat by model, but it typically involves unscrewing several screws along the bottom edge.

AD

2. Locate the pulley assembly. This usually resides behind the front panel and is easily found as it holds the belt.

3. Disconnect the module leads from the motor and remove the pulley assembly from the dryer. You might need to use a putty knife or a flathead screwdriver for this step.

4. Remove the old belt from the pulley. It may be stuck due to layers of lint, requiring the use of a putty knife or a flathead screwdriver to pry it loose.

AD

5. Inspect the pulley and the dryer's idler wheel (which keeps tension on the belt) for signs of wear. If necessary, replace these too. Replacement parts can be ordered online or from your local hardware store.

6. Once you've replaced the belt and any necessary parts, reattach the pulley assembly, reconnect the module leads, and put the front panel back on.

Dealing with a Slipped Belt

If the belt has slipped off its pulleys rather than breaking, repairing it involves a bit more work:

AD

1. Follow steps 1-4 under 'Replacing a Broken Belt.'

2. Once you've removed the old belt, find the frustratingly small hole in the side of the dryer's housing where the belt should exit. Using a suitable tool, like a thin screwdriver or a skewer, gently maneuver the belt through this hole until it reappears.

3. With the belt back in place, secure it with the retaining clip molded into the belt's edges.

4. Reassemble your dryer and test it.

Additional Troubleshooting Tips

Before you conclude that the belt is the problem, there are a few other issues you might want to check:

1. Inspect the door seal. A poor seal can cause a dryer to run inefficiently, exhibiting symptoms similar to those of a broken belt.

2. Check the drum bearings. If the drum spins unevenly, or if it's unusually hard to spin it by hand, the bearings might be at fault.

3. Examine the motor. Sometimes, the motor itself is faulty and needs replacing.

Remember, while fixing a Samsung dryer belt isn't overly complicated, working with appliances always carries risks. If you're unsure about any part of the process, don't hesitate to contact a professional. Now that you know how to fix a Samsung dryer belt, you're equipped to tackle this common issue head-on.

Regular maintenance and quick responses to any signs of trouble can extend the life of your Samsung dryer, ensuring you always have clean, dry clothes. Happy repairing!

AD