how to fix power steering assist fault ford fusion

How to Fix Power Steering Assist Fault on Ford Fusion

By Ashley Jones
AD

Is your Ford Fusion displaying a "Power Steering Assist Fault" warning light? Don't panic. This issue can often be resolved with some straightforward troubleshooting. Let's guide you through how to fix power steering assist fault on your Ford Fusion.

Before you begin, ensure you have basic tools like a socket set, a ratchet, and safety glasses. Always work in a well-ventilated area and be cautious when dealing with electrical components.

Understanding the Power Steering System

First, let's gripes with the basics. Your Ford Fusion's power steering system uses a pump driven by the engine to provide hydraulic power. This helps you turn the wheels with ease. When the system detects a fault, the warning light illuminates, and you may experience increased steering effort.

AD
Troubleshooting Ford Fusion Power Steering Assist Fault
Troubleshooting Ford Fusion Power Steering Assist Fault
Ford
Ford
How To Change Power Steering Fluid | Autoblog Wrenched
How To Change Power Steering Fluid | Autoblog Wrenched

There are several components that could cause a "Power Steering Assist Fault." We'll explore these components under two main topics: the power steering pump and the electrical components.

Inspecting the Power Steering Pump

Begin by checking the power steering pump. The most common issues here are a faulty pump or inadequate fluid levels.

How to Fix Power Steering not Working - Try this Reset first!
How to Fix Power Steering not Working - Try this Reset first!
Ford Fusion Workshop Repair Manuals
Ford Fusion Workshop Repair Manuals

To access the pump, crawl under your Ford Fusion and find the pump located at the front of the engine. First, check the pulley for any signs of damage or excessive movement. Then, examine the drive belt for wear and tear. If necessary, replace the belt or the pump.

Checking Power Steering Fluid Levels

Next, check the power steering fluid levels. Low or contaminated fluid can cause the system to malfunction.

AD

Locate the power steering reservoir, usually on the drivers' side of the engine bay. Remove the dipstick, wipe it clean, and reinsert it. The fluid level should be between the MIN and MAX marks. If it's low, top it off with the recommended fluid, usually a hydraulic fluid labeled for power steering systems.

Examining Electrical Components

Now, let's turn our attention to the electrical components. The power steering system relies on sensors and wiring to function correctly.

Start by checking the power steering pressure sensor. This sensor is typically located on the power steering pump. Inspect it for any signs of damage or corrosion. If necessary, replace it.

AD

Investigating the Control Module

The power steering control module, also known as the Electronic Power Assisted Steering (EPAS) module, is another potential culprit. This module controls the power steering system.

First, locate the module, usually near the power steering pump. Disconnect the electrical connectors and inspect them for any signs of damage or corrosion. Clean the connectors if necessary. If the module seems faulty, replace it.

Checking the Wiring and Connections

Thoroughly inspect the wiring harness and connectors throughout the power steering system. Look for any broken, frayed, or disconnected wires. Also, check for any corrosion or damage to the connectors.

AD

If you find any damaged wiring or connectors, repair or replace them as necessary. Ensure all connections are clean and secure.

After addressing any issues, clear the fault codes from your Ford Fusion's computer using an OBD-II scanner. If the warning light goes out, your repair was successful. If not, you may need to seek the help of a professional mechanic. Regular maintenance and timely fixes can help you avoid costly repairs and keep your Ford Fusion on the road.

AD