How to Fix an Overwound Watch
Have you ever noticed your watch running faster than usual? It could be overwound, a common issue among mechanical watches. Overwinding can happen when the mainspring, the watch's power source, is fully extended before the watch stops running. This can cause the watch to speed up. Don't worry, it's a fixable issue. Let's guide you through the process of how to fix an overwound watch.
First, it's crucial to understand that watches are delicate instruments. While many repairs can be done at home with the right tools and knowledge, some complex issues should be left to professional watchmakers. Always prioritize your watch's well-being.
Understanding Overwinding
Before we dive into how to fix an overwound watch, let's first understand the cause. Overwinding mainly happens when the watch is manually wound too many times or when the watch's automatic winding system snakes the mainspring too much.
Mechanical watches have a slipping clutch to prevent overwinding. However, if the clutch fails or if you're not careful while manually winding, it's possible to overwind your watch.
Identifying an Overwound Watch
Spotting an overwound watch is relatively easy. The most common sign is that your watch is running faster than usual. It might gain time significantly throughout the day or even reset itself while you're wearing it.
Another sign is a continuous, rhythmic ticking sound from your watch. In a normal watch, you should hear one tick per second, but if you're hearing more, it could be an indication of overwinding.
Preventive Measures
Prevention is always better than cure. Here are a few tips to prevent overwinding your watch:
- Don't wind your watch more than necessary. Usually, around 40 turns is sufficient for a full wind.
- If you have an automatic watch, try to keep it moving periodically to prevent it from fully winding the mainspring.
- Regular maintenance can help prevent many watch issues, including overwinding. Take your watch for periodic servicing.
How to Fix an Overwound Watch
Now that we've looked at the causes and prevention, let's move on to the main topic: how to fix an overwound watch.
Before you start, ensure you have the right tools. You'll need a demagnetizer, a watch winder or a way to keep the watch running, and possibly a strop or a watch spring cleaner. Also, ensure your hands are clean and free from grease or oils to prevent damaging your watch.
Demagnetizing Your Watch
The first step in fixing an overwound watch is to demagnetize it. Overwinding can sometimes cause your watch to become magnetized, which can affect its accuracy. Here's how you can demagnetize your watch:
- Use a demagnetizer tool. These are commonly available and can help restore your watch's accuracy.
- Alternatively, you can use an AC motor or a loudspeaker to demagnetize your watch. Just place it close to your watch and turn it on for a few seconds.
Letting Your Watch Run Down
After demagnetization, the next step is to let your watch run down completely. This will relax the mainspring and help reset your watch. Here's how:
- If you have a watch winder, set it to run in a direction that winds your watch the least. Let it run until your watch stops.
- If you don't have a watch winder, you can keep your watch in a safe place and let it run down naturally. This might take a few days, so be patient.
Once your watch has stopped, it's a good idea to let it sit for a few hours to ensure the mainspring is fully relaxed. Then, you can start adjusting your watch.
Adjusting Your Watch
Now that the mainspring is relaxed, it's time to adjust your watch's time settings. Here's how:
- First, slow down the second hand by simultaneously pulling out the crown and pressing the pusher. This should slow down or even stop the second hand.
- Then, set your watch to the correct time. The crown should be in the first (time-setting) position.
- After setting the correct time, gently push the crown back in. The watch should now run at its normal rate.
When to See a Professional
While many watch issues can be fixed at home, there are times when a professional watchmaker is the best option. Here are a few signs that you might need professional help:
- Your watch is still running fast after following the above steps.
- You notice any unusual noises coming from your watch.
- Your watch's accuracy is significantly affected.
- You don't feel confident performing the steps above.
Remember, a watch is a precision instrument that requires careful handling and regular maintenance. Always prioritize its well-being. With the right care and knowledge, you can ensure your watch runs accurately and reliably for many years to come.
So, the next time you notice your watch running faster than usual, don't panic. With the guide above, you're well-equipped to handle the situation. Happy watch fixing!