how to fix my directv remote

Fix My Directv Remote: Simple Steps to Troubleshoot

By Matthew Jones
AD

Is your DirecTV remote acting up, not responding, or worse, completely unresponsive? You're not alone. Remote control issues are among the most common consumer electronics problems. Before you consider a replacement, try these troubleshooting steps to fix your DirecTV remote.

First, let's address the most basic issue: power. Your remote needs power to function, and it gets this from batteries. So, it's always a good idea to start by checking your remote's batteries.

Battery Replacement and Other Quick Fixes

Before you grab your screwdriver, ensure your remote is well within range of your DirecTV receiver. Try pointing the remote directly at the receiver, rather than at the TV, to see if that makes a difference.

AD
DIRECTV Remote Not Working? Guide to Reseting Your Remote
DIRECTV Remote Not Working? Guide to Reseting Your Remote
a remote control sitting next to a crayon pen
a remote control sitting next to a crayon pen
a white and black remote control with the word direct on it's display button
a white and black remote control with the word direct on it's display button

Replace batteries

If you've confirmed your remote is within range, the next step is to replace the batteries. Even if you're not sure how old they are, replacing them won't harm anything and might solve your problem.

To replace the batteries, first, locate the battery compartment on your remote. It's usually on the back. There might be a slide lid, or you might need to unscrew the back cover. Slide the new batteries into the compartment, ensuring the polarity is correct (+/-), and then securely replace the back cover or slide the lid back into place.

TECH SUPPORT | HOW TO PROGRAM DIRECTV REMOTE TO TV and RECIEVER GENIE and RC66 MODEL
TECH SUPPORT | HOW TO PROGRAM DIRECTV REMOTE TO TV and RECIEVER GENIE and RC66 MODEL
How to Open your DirecTV Remote
How to Open your DirecTV Remote

Check battery compartment for debris

While you have the battery compartment open, take a quick look around. You'd be surprised how often small bits of debris find their way into the compartment and interfere with the batteries making contact with the remote's circuit board. Use a cotton swab or a soft brush to gently remove any debris you find.

Don't be tempted to use household cleaners or other liquids to clean the compartment. While they might seem effective, they can damage the compartment and make your problem worse.

AD

Simple Troubleshooting Steps

If replacing the batteries didn't fix your issue, try these simple troubleshooting steps to identify other potential problems.

Perform a Powercycle

A powercycle, in this case, involves turning both your DirecTV receiver and your remote completely off, then turning them back on similarly. Start by unplugging both devices from the power source. Wait for about 30 seconds, then plug them back in and turn them on.

When turning the receiver on, wait for it to fully boot up before trying to use your remote. This can take a few minutes.

AD

Check for Interference

Other electronic devices, especially those that broadcast on similar frequencies, can interfere with your remote's signal. Try moving other devices out of the way and seeing if that makes a difference. Also, consider moving your remote further away from other devices if that's possible.

Some devices, like cordless phones and microwave ovens, are notorious for interfered with remote signals. If you suspect they're causing a problem, operate them as little as possible while you're trying to troubleshoot your remote.

Advanced Troubleshooting Steps

If none of the above steps have worked, it might be time to move on to more advanced troubleshooting. This can involve resetting your remote, retraining it, or even replacing some of its components.

AD

Resetting your remote

Resetting your remote is similar to performing a software reset on your smartphone. To do this, locate the reset button on your remote. It's usually found under the batteries, behind a small hole. Use a small, thin object like a paperclip to press and hold the button for about 10 seconds. Then, release it and try using your remote again.

If this doesn't work, there's a possibility that your remote has lost its pairing with your DirecTV receiver. In that case, you'll need to retrain it.

Retraining your remote

Retraining your remote is a bit more involved but can fix most pairing issues. Start by turning off your DirecTV receiver. Then, press and hold the "Select" and "Enter" buttons on your remote for about 10 seconds. While still holding these buttons, turn your receiver back on.

Hold the buttons for the entire duration of the boot-up process, then release them. If your remote has been properly retrained, you shouldn't need to perform this process again.

If you've tried all these steps and your DirecTV remote still isn't working, it might be time to consider a replacement. Remember, it's always cheaper to troubleshoot and potentially fix a problem than it is to replace the entire device.

However, if you're staring down the barrel of a remote that just won't cooperate, consider investing in a universal remote or a smart remote, like the Amazon Fire TV Cube, which can learn your DirecTV commands and make controlling your TV more intuitive than ever.

So, grab those tools and get to work. With a little patience and these troubleshooting steps, you should be back to binging your favorite shows in no time.

AD