how to fix jammed stapler

Jammed Stapler: 5 Easy Fixes You Can Do at Home

By John Harris
AD

Ever found yourself in the midst of a productive annotation spree, only to have your stapler jam and bring your progress to a halt? Don't let a jammed stapler disrupt your momentum. With a few simple steps, you can fix the issue and get back to work. Let's dive into how to unjam a stapler and keep your productivity flowing.

Before we delve into the solutions, it's crucial to understand why staplers jam in the first place. Most jams occur due to improper technique, using large stacks of paper, or attempting to staple paper that's too thick. Additionally, old or low-quality staples can lead to jams. Now that we've identified the culprits, let's explore how to fix a jammed stapler.

Identifying the Type of Jam

Not all stapler jams are created equal, and the solution varies depending on the type of jam. The first step is to diagnose the issue:

AD
Fine Wire Stapler Repair-How to fix jammed stapler issues
Fine Wire Stapler Repair-How to fix jammed stapler issues
How to Unjam a Stapler
How to Unjam a Stapler
someone is cutting something with a pair of scissors
someone is cutting something with a pair of scissors

Partial Jam: The stapler is working, but the staple only goes halfway through the stack of paper.
Full Jam: The stapler isn't working at all, regardless of the number of sheets.
Over Staple: The staple is completely through the papers, but excess sticking out from one side.
Stapler Won't Release: The stapler has “eaten” the staple but won't release it from the carriage.

Fixing a Partial Jam

If you're experiencing a partial jam, try the following:

How to Clear a Jam from the Arrow Plier Stapler
How to Clear a Jam from the Arrow Plier Stapler
a white sheet of paper sitting on top of a wooden desk
a white sheet of paper sitting on top of a wooden desk

1. Remove the problematic paper: Try stapling just one sheet at a time until the stapler works correctly.
2. Use lighter paper: If you're stapling multiple sheets, use lighter or thinner paper to reduce the load on the stapler.
3. Open the stapler: If the previous steps don't work, open the stapler (ensure it's unloaded first) and remove any jammed staples or paper.

Fixing a Full Jam

For full jams, follow these steps:

AD

1. Unload the stapler: Remove any remaining staples in the carriage.
2. Inspect the mechanism: Look for any jammed staples, paper, or other debris.
3. Clean the stapler: Use a pencil or toothpick to gently dislodge and remove any jams.

Dealing with Over Staples and Recalcitrant Staplers

While less common, you may encounter over staples or a stapler that refuses to release its staple.

Fixing an Over Staple

If the staple is entirely through the papers but has excess sticking out one side, try this:

AD

1. Use scissors: Carefully snip off the excess staple with scissors.
2. Use pliers: Carefully pull the excess staple out with a pair of needle-nose pliers.

Making a Stapler Release a Stubborn Staple

If your stapler has “eaten” the staple but won't release it, try the following:

1. Open the stapler: Open the stapler (without a staple in the carriage) multiple times to help “reset” it.
2. Tighten the stapler: If the stapler is too loose, tightening the screw with an Allen wrench can help.

AD

preventing future jams, always ensure you're using a high-quality stapler and staples designed for your specific model. Avoid storing your stapler with staples loaded, and keep it away from extreme temperatures and humidity. With a little care and attention, your stapler should serve you well for years to come.

Happy stapling! Now that you know how to fix a jammed stapler, you're ready to tackle any productivity challenge that comes your way.

AD