how to fix ice maker on whirlpool refrigerator

How to Fix Whirlpool Refrigerator Ice Maker

By Laura Martin
AD

Is your Whirlpool refrigerator not cranking out ice like it used to? Don't let warm drinks damper your spirits. Let's dive into troubleshooting and fixing your ice maker, ensuring you've got cold refreshments all year round.

Before you start, ensure your refrigerator is elephant-proof: unplugged and switched off. Safety first, right? Now, let's get your ice maker back on track.

Inspect the Ice Maker Arm

First things first, check if the ice maker arm is functioning correctly. This plastic part rotates to eject ice cubes.

AD
Ice Maker Troubleshooting: How to Fix an Ice Maker | Whirlpool
Ice Maker Troubleshooting: How to Fix an Ice Maker | Whirlpool
How To Fix Ice Maker on Whirlpool French Door Refrigerator - How to Replace IceMaker - Repair
How To Fix Ice Maker on Whirlpool French Door Refrigerator - How to Replace IceMaker - Repair
DIY Guide: Replacing W10873791 Ice Maker in Whirlpool, KitchenAid, Maytag Refrigerators
DIY Guide: Replacing W10873791 Ice Maker in Whirlpool, KitchenAid, Maytag Refrigerators

To troubleshoot, ensure it's not stuck or obstructed. If it's frozen to a cube (literally), grab a hairdryer to thaw it, then wiggle it gently to see if it's moving freely.

Check for Interference

Sometimes, the arm might be hitting something as it tries to fill your ice bucket. Inspect if the bucket is properly placed and not blocking the arm's path.

How to Troubleshoot and Replace Whirlpool Side-by-Side Refrigerator Ice maker
How to Troubleshoot and Replace Whirlpool Side-by-Side Refrigerator Ice maker
Ice Maker Not Making Ice / Whirlpool / What To Check and How To Fix
Ice Maker Not Making Ice / Whirlpool / What To Check and How To Fix

If your bucket seems fine, it could be time to clean. Ice buckets and trays can get grimy, affecting ice quality and maker performance. Learn how to clean your ice maker here.

Reset the Ice Maker

Whirlpool refrigerators come with a reset button for their ice maker. It's usually located behind the upper right corner panel. Gentle reminder: unplug before you proceed!

AD

Press and hold the button for around 5 seconds, then release. Your fridge should now reset, sorting out minor glitches. Plug it back in and give your ice maker 24 hours to produce ice.

Inspect Water Inlet Valve

Next, let's examine the water inlet valve. This crucial part supplies water to the ice maker. If it's faulty, your ice maker will stay idle.

First, locate the valve towards the back of your fridge. Then, using a multimeter, test it for continuity. If it doesn't show any, it's likely faulty and needs replacing.

AD

Test the Valve

Before replacing, you can test the valve with a multimeter to confirm it's at fault. Disconnect the wires, set your multimeter to continuity mode, and touch the probes to the valve's terminals.

If you get no readings (or an infinite resistance reading), the valve is likely not receiving power or is faulty. Proceed with the replacement if that's the case.

Replace the Valve

valle? Order a compatible one and replace it. Disconnect the old valve, connect the new one, and reattach the waterline.

AD

Replacing the valve might seem daunting, but Whirlpool provides detailed instructions in your refrigerator's Owner's Manual. If you're unsure, consult a professional.

Refrigerators are lifesavers, especially on hot days. With a little troubleshooting and care, you can enjoy cold drinks all year round. Happy fixing!

AD