how to fix drywall cracks in corners

How to Fix Drywall Cracks in Corners

By Steven Taylor
AD

Cracked drywall corners can be unsightly and may even weaken the structural integrity of your home. Fixing these cracks is a common DIY task, and with the right tools and techniques, you can restore your walls to their former glory. Let's dive into the step-by-step process of how to fix drywall cracks in corners.

Before we begin, it's crucial to understand that the techniques used to repair drywall cracks in corners can vary slightly from those used on flat surfaces. The added complexity of the corner angle requires a specific approach, which we'll explore in detail. Remember, patience and precision are key when it comes to drywall repair.

Gathering Your Tools and Materials

Before you start, ensure you have all the necessary tools and materials to complete the job efficiently. Here's a list of what you'll need:

AD
The Easiest Way To Touch Up Damaged Drywall Corners
The Easiest Way To Touch Up Damaged Drywall Corners
How To Repair Drywall Cracks In Corners Professionally
How To Repair Drywall Cracks In Corners Professionally
the easy way to fix dented corners in your home
the easy way to fix dented corners in your home
  • Utility knife
  • Screwdriver
  • Tape measure
  • Drywall saw or keyhole saw
  • Drywall sanding screen or sandpaper
  • Drywall joint tape
  • Drywall compound
  • Joint compound or "mud" (for corners)
  • Corner bead (optional)
  • Stud finder
  • Pencil
  • Putty knife (6-inch and 12-inch)
  • Sandable spackling or lightweight fill compound
  • Prime-ready spackling (for touch-ups)

Once you've assembled your tools and materials, you're ready to tackle the drywall repair. The next step is to prepare the area by cleaning and removing any loose or damaged drywall.

Preparing the Drywall for Repair

Using a utility knife, carefully cut away any loose or crumbling drywall at the corners. Be sure to cut along the crack, making a straight, perpendicular cut to the wall surface. This will help you create a clean edge to work with and prevent further damage.

How to Fix Chipped Drywall Corners
How to Fix Chipped Drywall Corners
29K views · 2.8K reactions | How to fix a chipped & damaged corners! #corner #paint #peeling #chipped #diy #decorating #painting #painter #foxy | Kris Fox Devos | Facebook
29K views · 2.8K reactions | How to fix a chipped & damaged corners! #corner #paint #peeling #chipped #diy #decorating #painting #painter #foxy | Kris Fox Devos | Facebook

If the crack is wide or there's visible damage to the drywall studs behind the cracks, you may need to cut out a larger portion of the drywall and replace it with a new piece. Use a drywall saw or keyhole saw to make the cuts, ensuring you cut along the studs to maintain the wall's structural integrity.

Applying Joint Compound and Corner Bead

Once you've prepared the area, it's time to apply the joint compound. If you're using a corner bead, apply it along the corner first, using a 6-inch putty knife to press it firmly into place. The corner bead helps reinforce the corner and provides a smooth surface for the joint compound to adhere to.

AD

Next, apply a thin layer of joint compound (mud) over the corner bead or directly to the corner using a 12-inch putty knife. Smooth the compound evenly, ensuring you have good coverage along the crack. Allow the compound to dry according to the manufacturer's instructions, usually 24 hours.

Finishing the Drywall Repair

Once the joint compound has dried, you'll need to lightly sand the repaired area and apply a second coat. Sanding ensures a smooth surface for the final application of joint compound or spackling. Use a drywall sanding screen or fine-grit sandpaper, and a light touch to avoid creating sanding marks or damaging the repaired area.

Applying Joint Tape and Final Coat

After sanding, apply a layer of joint compound (mud) to the repaired area and then embed a piece of drywall joint tape into the mud. Ensure the tape is fully saturated and completely embedded, with no buckles or wrinkles. Allow the first layer to dry according to the manufacturer's instructions, usually 24 hours.

AD

Once the first layer has dried, apply a second layer of joint compound or mud over the taped area using a 12-inch putty knife. Smooth the compound evenly, ensuring you maintain a feathered edge that blends with the surrounding wall. Allow this final layer to dry completely before sanding and applying a final touch-up coat with prime-ready spackling.

As your repair work nears completion, take a moment to step back and examine your handiwork. With a little patience and practice, you'll soon be able to fix drywall cracks in corners like a professional. Don't forget, the key to successful drywall repair is taking your time and ensuring each layer is dry and smooth before moving on to the next step.

AD