how to fix broken vertical blind slats

"How to Fix Broken Vertical Blind Slats"

By Brian Young
AD

Vertical blinds are a stylish and practical choice for windows, but like any other window treatment, they can wear out or break over time. One common issue is a broken slat. Don't throw yours away just yet - here's a step-by-step guide on how to fix broken vertical blind slats. With a little DIY spirit and some simple tools, you can have your blinds in top shape again!

Before we dive into the repair process, safety first! Unplug your blind's power supply if it's electric, and make sure the slats are in their fully open position to avoid any potential injuries. Now let's get started.

Tools and Materials Needed

You might already have these materials at home, making this repair project quite cost-effective:

AD
DIY homemade patch to fix broken vertical blind slats #diyhome #homehacks Diy Homemade, Vertical Blind Slats, Vertical Blinds, Home Hacks, Fix It, Blinds, Home Diy, Repair
DIY homemade patch to fix broken vertical blind slats #diyhome #homehacks Diy Homemade, Vertical Blind Slats, Vertical Blinds, Home Hacks, Fix It, Blinds, Home Diy, Repair
How to easily fix broken vertical blind slat - DIY
How to easily fix broken vertical blind slat - DIY
Quick Fix for a Vertical Blind Slat
Quick Fix for a Vertical Blind Slat
  • New vertical blind slats (match the size and color of your existing ones)
  • Screwdriver (usually a Phillips head)
  • Needle-nose pliers
  • wire cutter (if replacing the lift cord)
  • Hammer (for a specific method to repair broken ladders)

Replacing a Broken Slat

This method works best when only one or a few slats are damaged:

  1. Remove the broken slat by sliding the ladder tapes (the vertical strings that hold the slats) out of the broken slat's holes.
  2. Remove the end caps or finials at both ends of the existing slats to reveal the sollevette (a small runner at the top of each slat).
  3. Slide the broken slat off the louvette and out of the header. You might need to tilt the slat slightly to get it to slide off.
  4. Insert the new slat onto the louvette and slide it back into the header, ensuring the ladder tapes go through the holes in the new slat.
  5. Replace the end caps or finials and check that the new slat slides up and down smoothly.

Repairing a Torn or Broken Ladder Tape

If the vertical ladder tape (the string holding the slats) is torn or broken, here's how to repair it:

How to Replace a Broken Slat on a Mini Blind
How to Replace a Broken Slat on a Mini Blind
How to Temporary Repair Your Vertical Blinds With a Flat Head Screwdri
How to Temporary Repair Your Vertical Blinds With a Flat Head Screwdri
  1. Remove the broken slat following the steps mentioned above.
  2. Use needle-nose pliers to untie the ladder tape from the nearer slat. You might need to cut the tape to separate it.
  3. Tie the ladder tape to the new slat, ensuring it's taut and secure.
  4. Reassemble the slats and replace them following the earlier steps.

Fixing Loose or Bent Lift Cords

If your vertical blind has a lift cord to open and close the slats, it might loosen or bend over time, causing the blinds to malfunction.

Tightening a Loose Lift Cord

Here's how to restore tension in a loose lift cord:

AD
  1. Remove the mounting screws from one side of the headrail and slide the headrail about an inch off the bracket.
  2. Tighten the tension control knob at the end of the headrail where the lift cord runs through.
  3. Reassemble the headrail and bracket, ensuring the blinds open and close smoothly.

Replacing a Broken Lift Cord

If the lift cord is severely damaged or broken, here's how to replace it:

  1. Remove the entire headrail from the mounting brackets.
  2. Cut the broken cord as close to the headrail as possible using the wire cutter. Leave a few inches of loose cord if you're unsure about the cord length needed.
  3. The new cord should be long enough to reach from the bottom of the headrail to the floor (plus a few inches for tension). Feed the new cord through the hole in the headrail and pull it down until it's taut.
  4. Reassemble the headrail and bracket, ensuring the blinds open and close smoothly.

Regular maintenance and occasional cleaning will help your vertical blinds last longer. And remember, preventing damage is always easier than fixing it. Keep your blinds away from direct sunlight and excessive heat, and avoid hanging heavy objects from the lift cord to prolong their lifespan.

Now go ahead, give these repair methods a try, and enjoy your functional and stylish vertical blinds again! Happy fixing!

AD
AD