how to fix an extension cord plug

How to Fix an Extension Cord Plug

By Rachel Anderson
AD

Experiencing issues with a damaged extension cord plug? Don't throw it away just yet. With a little DIY repair, you can restore functionality and safety. Here's a comprehensive guide on how to fix an extension cord plug, ensuring it's back in service safely and efficiently.

Before we dive into the repair process, it's crucial to understand that safety should always be your top priority when dealing with electrical components. Always turn off the power source connected to the extension cord, and let the plug cool down before starting any repairs.

Inspecting the Damage

Carefully examine the plug to understand what caused the damage. This could be due to frayed or exposed wires, broken terminals, or damaged insulation. Pinpointing the issue helps in selecting the right repair method.

AD
How To Repair a Cut Extension Cord
How To Repair a Cut Extension Cord
How To Replace An Extension Cord Plug - Hunker
How To Replace An Extension Cord Plug - Hunker
How To Replace an Extension Cord Plug
How To Replace an Extension Cord Plug

A common issue is frayed wire insulation. If the insulation around the wires is damaged or completely missing, exposing the wires, you'll need to replace the plug entirely, as this can't be safely repaired.

Gathering Tools and Materials

To fix an extension cord plug, you'll need a few tools and materials. Here's a list of what you'll need:

a close up of a wire with the words don't throw it out how to repair a damaged cord
a close up of a wire with the words don't throw it out how to repair a damaged cord
Extension Cord Repair - How to Replace Plug on Outdoor Extension Cord End
Extension Cord Repair - How to Replace Plug on Outdoor Extension Cord End
  • Replacement electrical plug (ensure it matches your extension cord's voltage and amperage)
  • Wire cutter/strippers
  • Needle-nose pliers
  • Screwdriver (depending on the plug's terminals)
  • Heat-shrink tubing and a heat source (like a heat gun or hair dryer)
  • Electrical tape

Removing the Broken Plug

Start by cutting off the damaged plug from the extension cord using wire cutters. Ensure you cut far enough away from the damage to have clean, safe wire to work with.

Strip back the outer insulation from the extension cord, exposing about an inch and a half of the individual wires. You can use wire strippers or carefully cut away the insulation with the wire cutters.

AD

Preparing the Wire Ends

Carefully strip about 3/4 of an inch of insulation from each of the two wires, ensuring you don't nick or damage the underlying metal conductor.

Using needle-nose pliers, gently straighten and bend the wire ends into the shape that fits your new plug's terminals. Typically, one wire goes to the wider terminal (neutral), and the other goes to the smaller terminal (hot or live). Ensure you match the wire colors to their respective terminals (brown/blue for neutral, and brown/black/bare for live).

Attaching the Wire to the New Plug

Click apart the terminals on the new plug if they're not already separate. Feed the prepared wire ends into the corresponding terminals, ensuring you insert them far enough to make a solid connection. Use your screwdriver or pliers to secure each terminal tightly onto the wire without pinching the wire too hard.

AD

Once both terminals are secure, reassemble the plug, ensuring it clicks firmly together. Try gently wiggling the wires to ensure a solid connection. If the plug doesn't click together securely, double-check that the terminals are fully connected to the wires.

Securing the Connection

After ensuring a solid connection, use heat-shrink tubing to insulate the connection between the wire and the plug. Cut a piece of tubing long enough to cover the exposed wire and the base of the plug. Heat one end of the tubing, and slide it over the connection. Use a heat gun or hair dryer to shrink the tubing around the wire and base of the plug, ensuring it's secure and waterproof.

Additionally, wrap more electrical tape around the heat-shrink tubing for extra protection and to secure the wiring further within the plug's housing.

AD

Testing the Fixed Plug

Before plugging in your repaired extension cord, it's crucial to test the repaired plug to ensure it's working correctly and safely. Use a multimeter to check for continuity between the two terminals. If the multimeter shows continuity (indicating a closed circuit), the plug should be ready for use.

Once you've confirmed the repair, you can safely use your extension cord again. Always be cautious when using extension cords, ensuring they're not overloaded, placed in high-traffic areas, or configured in ways that could damage them or pose a fire risk.

That's it! You've successfully fixed an extension cord plug. By following these steps, you've not only saved money but also improved safety in your home or workspace. Stay safe, and happy fixing!

AD