how to fix aerosol can that won't spray

How to Fix Aerosol Can That Won't Spray

By Robert Rodriguez
AD

Imagine you've just picked up your favorite can of air freshener, ready to spruce up your room, but as you press the nozzle, nothing happens. Your aerosol can won't spray. Don't despair; we're here to help you troubleshoot and fix this common issue. Learn how to revive your aerosol cans and save a trip to the store.

Before you start, ensure your can is in a well-lit area and, if needed, wear gloves to protect your hands. Here's how you can tackle this problem step by step.

Checking the Aerosol Can

First, meticulously examine your aerosol can. It might seem obvious, but sometimes, cans appear fuller than they actually are. Sound could also be an indicator - an empty can will sound differently when shaken, so give it a good rattle to check the contents.

AD
STOP Throwing Away Aerosol Spray Cans With No AIR! How To Recharge, Save And Fix It! DIY
STOP Throwing Away Aerosol Spray Cans With No AIR! How To Recharge, Save And Fix It! DIY
How to Refill Aerosol Spray Cans with Air | Recharge Empty Aerosol Spray Can with Air
How to Refill Aerosol Spray Cans with Air | Recharge Empty Aerosol Spray Can with Air
Can won't spray? Cold weather? Unclog the valve!
Can won't spray? Cold weather? Unclog the valve!

Once you're sure the can isn't empty or damaged, it's time to delve deeper into the problem.

Inspect the Nozzle

The nozzle is the primary suspect when your aerosol can won't spray. It could be clogged or not correctly aligned. Begin by cleaning the nozzle. Hold it under warm running water, then gently scrub it with a small, soft-bristled brush, such as a toothbrush. Be careful not to dislodge the tiny spring that operates the nozzle.

How to refill spray can (make an aerosol can spray again) using portable air compressor MY WAY
How to refill spray can (make an aerosol can spray again) using portable air compressor MY WAY
a fork is next to a can of soda
a fork is next to a can of soda

Test the nozzle after cleaning. If it's still not working, the spring might be stuck or damaged. Try to realign or gently bend the spring back into place using a small pair of pliers. Be very gentle to avoid further damage.

Check the Valve

If cleaning the nozzle didn't help, the culprit might be the valve. A faulty valve could be preventing the liquid from being released. Fortunately, you can usually fix this at home. First, turn the can upside down and shake it to ensure the liquid reaches the valve.

AD

Next, try to reposition the valve. Gently squeeze the can's metal base (not the sides) to see if that helps. If not, you might need to replace the valve, which will likely require professional assistance.

Shaking and Priming the Aerosol Can

Sometimes, all your can needs is a good shake and a bit of priming. This can help unclog any tiny blockages and get the liquid flowing again.

Start by shaking the can vigorously for about 30 seconds. Then, hold the can upright and press the nozzle several times. If you're using a primer button, press it first, then spray the can. Continue this process until you see a consistent spray pattern.

AD

Check the Pressure

If your aerosol can is gas-powered, it might not be getting enough pressure to produce a spray. Check the gas cartridge and replace it if it's empty or nearing the end of its life. Remember to dispose of old cartridges safely according to your local regulations.

If you're unsure about handling gas cartridges, it's best to consult a professional. Safety should always be your top priority.

Invert and Spray

In some cases, you can unblock your aerosol can by inverting it and spraying the liquid out through the bottom. This works because the pressure is reversed, which can sometimes dislodge any blockages in the nozzle or valve.

AD

To do this, carefully turn the can upside down and gently squeeze the sides. Be cautious when doing this, as the liquid might come out more forcefully than usual. If you're unsure, it's better to call a professional to avoid potential harm or damage.

There you have it! With these tips, you should be able to fix an aerosol can that won't spray. Happy repairing!

AD