Easy Fix: How to Repair a Side Mirror in 5 Steps
If you've recently noticed your side mirror askew or even broken, it can be frustrating, especially when safety is at stake. But before you rush to the mechanic or replace it, consider that fixing a side mirror might be a DIY project. This guide walks you through the steps to repair or replace a side mirror, ensuring you navigate the process safely and effectively.
Attempting to fix your side mirror on your own can save you money and gives you a sense of accomplishment. Plus, it's an opportunity to learn a new skill. But remember, safety is paramount. Always ensure your vehicle is stable and parked on a level surface before starting any repair work.
Main Causes of Side Mirror Damage
Understanding why your side mirror is broken is the first step to fixing it. Some common reasons include:
1. **Vehicle Accident**: The most common cause is minor collisions or hitting curbs when parking. The force can damage or knock the mirror out of alignment.
2. **Weathering and Age**: Over time, the mirror's mounting hardware can wear out, causing the mirror to droop or become misaligned.
When to Repair and When to Replace
If your mirror is slightly askew but the glass is intact, you can likely repair it. However, if the mirror is cracked, broken, or missing, replacement is usually necessary.
Factor in your vehicle's age and the mirror's condition. If your vehicle is older, it might be more cost-effective to replace the mirror entirely rather than repairing it.
Materials Needed for Repair or Replacement
For repair, you might need a wrench, socket set, screwdriver, wire brush, and mirror adjustment screws. For replacement, you'll need a new side mirror, repair kit (if required), Allen wrench, socket wrench, and screwdriver.
Additionally, ensure you have a secure work area, preferably a garage or shaded spot outdoors. Have a jack and jack stands if you need to lift your vehicle for better access.
Steps to Fix a Side Mirror
These are general steps for both repair and replacement. Follow specific instructions provided with your repair kit or vehicle's repair manual for the most accurate guidance.
Mirror Repair Step-by-Step
1. **Jack Up the Vehicle**: If your vehicle is low to the ground, use a jack to lift it slightly for better access to the mirror base.
2. **Remove the Mirror Cover**: Using a screwdriver, carefully pry off the mirror cover. If it's stuck, gently use a flathead screwdriver to pry it loose.
3. **Locate the Adjustment Screws**: These are usually located at the edge of the mirror base. Clean any dirt or debris around the screws using a wire brush.
4. **Adjust the Mirror**: Using a screwdriver, gently turn the adjustment screws until the mirror is aligned correctly.
Mirror Replacement Step-by-Step
1. **Remove the Old Mirror**: Using a wrench or socket set, unscrew the mounting bolts on the mirror base. Slide the old mirror off and discard it.
2. **Prepare the New Mirror**: Attach the new mirror to the mounting bracket using the provided bolts and washers. Ensure it's facing the correct direction.
3. **Secure the New Mirror**: Position the new mirror on the mount, then secure it with the mounting bolts. Tighten them just enough to hold the mirror in place but not so much that you strip the threads.
4. **Test the Mirror**: Lower your vehicle, then check the mirror for alignment. Make any necessary adjustments using the mirror adjustment screws.
If your mirror isn't staying in place or you're unsure about any part of the process, don't hesitate to consult a professional mechanic.
Fixing or replacing your side mirror can seem daunting, but with the right tools and guidance, it's a task even beginner DIYers can handle. The next time you notice your side mirror out of alignment, before hitting the shop, consider giving this repair guide a try. Happy fixing!