How to Fix a Leaky Two-Handle Tubs Faucet
A leaky tub faucet with two handles can be more than just a nuisance - it's a waste of water and can lead to increased water bills. Fixing this issue can be a straightforward DIY project. In this guide, we'll walk you through the steps to repair a leaky tub faucet, helping you save water and money.
Before we dive in, let's ensure you have the right tools. You'll need an adjustable wrench, a screwdriver, a flashlight, pliers, a rag, and a faucet repair kit. The kit should include new O-rings, a new washer, and plumber's grease.
Identifying the Cause of the Leak
The first step in fixing a leaky faucet is to identify the cause of the leak. Tub faucets with two handles can have leaks at different points, each requiring a specific solution.
Check for leaks around the base of the faucet where it meets the tub. If water is leaking here, the issue is likely with the washer. Next, turn on the water and check both hot and cold water handles. If water is leaking from the spout when the handles are off, the issue might be an O-ring or a damaged spout seat.
Leaky Faucet Handle
If one or both of your faucet handles are leaking, the problem is likely a worn-out washer. Here's how to replace it:
1. Turn off the water supply to the faucet. Located under the sink, you'll find two Supply valves. Turn them clockwise until they stop.
2. Use an adjustable wrench to loosen and remove the packing nut, which is located at the base of the faucet handle.
3. Unscrew the handle and lift it off. You'll see a diverter or stem. If the stem is a simple straight piece, unscrew it using pliers. If the stem has a hexagonal head, use an adjustable wrench.
4. Pull out the stem. If it's stuck, use pliers to gently tap it until it loosens. Remove the washer and replace it with a new one from your repair kit. Apply a small amount of plumber's grease to the new washer.
5. Reassemble the faucet in reverse order, ensuring everything is tightened securely.
Leaky Spout
If water is leaking from the spout when the handles are off, the issue is likely with the spout seat or an O-ring.
1. Follow steps 1-3 under 'Leaky Faucet Handle' to remove the handle and stem.
2. Use an adjustable wrench to loosen and remove the packing nut. This will expose the faucet's main assembly.
3. Inspect the spout seat in the faucet body. It may be brass-colored and located at the base of the spout. If it's damaged, remove it and use pliers to remove any remaining bits.
4. Apply plumber's grease to a new spout seat and press it into place. It should be securely seated, but make sure it's not too tight to allow for easy water flow.
5. Reassemble the faucet in reverse order. If there's still a leak, it might be an O-ring that needs replacing. Follow the same process to access the O-ring, and replace it with a new one from your kit.
Additional Tips to Prevent Leaks
Regular maintenance can prevent leaks before they start. Here are some tips to keep your faucet in good condition:
- Clean the aerator regularly to remove mineral deposits that can restrict water flow and cause leaks.
- Inspect your faucet regularly for signs of wear or damage. If you notice anything unusual, address it promptly to prevent a small issue from becoming a big problem.
- Install a faucet handle or spring cap when not in use to protect it from damage and prevent leaks.
By following this guide, you should now be able to fix a leaky tub faucet with two handles. Keep in mind that if the leak persists after following these steps, it might be a more complex issue. In that case, it's best to contact a professional plumber. Regular maintenance and prompt attention to any signs of damage can help you save money and keep your faucet in good working condition for years to come.