how to fix a dyson ball vacuum

"Fix Your Dyson Ball Vacuum: A Step-by-Step Guide"

By Joseph Martin
AD

Do you find that your once-powerful Dyson Ball vacuum is now struggling to navigate your home or losing suction? You're not alone. Even the best vacuums can encounter issues over time. The good news is, many of these problems can be fixed with a little know-how. We're here to guide you through the process, one step at a time, helping you revive your Dyson Ball vacuum.

Before we dive into the specific solutions, remember that prevention is often the best cure. Regular maintenance, such as emptying and cleaning your vacuum, can help prevent many issues from arising in the first place. Let's start by understanding the different troubled areas: Mobility and Suction.

Reviving Your Dyson Ball Vacuum's Mobility

The Dyson Ball is renowned for its easy maneuverability, so when it starts to struggle, it's immediately noticeable. Here are two common reasons and their solutions:

AD
How To Restore Suction On A Dyson Ball UP19 UP13 Vacuum - Vacuum Repair By A Professional
How To Restore Suction On A Dyson Ball UP19 UP13 Vacuum - Vacuum Repair By A Professional
HOW TO CLEAN A DYSON ANIMAL UPRIGHT BALL VACUUM | VACUUM DEEP CLEAN | IN DEPTH CLEANING INSTRUCTIONS
HOW TO CLEAN A DYSON ANIMAL UPRIGHT BALL VACUUM | VACUUM DEEP CLEAN | IN DEPTH CLEANING INSTRUCTIONS
a young man holding a camera up to his face with the caption you need to know this dyson hack
a young man holding a camera up to his face with the caption you need to know this dyson hack

Dirty or Clogged Brush Bar

The brush barrolls at the bottom of your vacuum, and if it's not turning smoothly, it can impede your vacuum's progress. Hair, dust, and debris can cause it to slow down or stop altogether. To clean it:

  1. First, remove the brush bar if your model allows. Consult your user manual for specific instructions.
  2. Use scissors to cut tangled hair.
  3. If your brush bar is clogged with dust or debris, you may need to use a knife or skewer to poke out the blockages.

Before reattaching, ensure there's no debris left behind in the vacuum's underside.

Dyson Ball Animal 2 - DEEP CLEAN - Restore Suction - Troubleshooting
Dyson Ball Animal 2 - DEEP CLEAN - Restore Suction - Troubleshooting
How To Clean Filters On Dyson Ball? A Step By Step Guide
How To Clean Filters On Dyson Ball? A Step By Step Guide

Blocked Airway

Sometimes, large debris can get stuck in your vacuum's airway, causing it to lose suction and maneuverability. To check for blockages:

  • Lower the vacuum and remove the canister.
  • Empty the dirt reservoir and rinse it with water.
  • Inspect the hose and wand for any obstructions. Use a wire or a hooked tool to remove them if necessary.

Restoring Your Dyson Ball Vacuum's Suction

Loss of suction is a common issue, but it's usually fixable. Here are the main culprits and how to address them:

AD

Clogged Filter

Dyson vacuums use advanced filter technology to trap dust and allergens. However, over time, these filters can become clogged, reducing your vacuum's suction. To clean your filter:

  1. locate and remove your filter. Consult your user manual for its exact location.
  2. If it's a HEPA filter, tap it gently against a surface to dislodge any debris.
  3. Replace the filter in the vacuum and see if suction improves.

If your filter is still not working efficiently, it may need to be replaced.

Worn or Torn Seal

The seal around your vacuum's dirt reservoir can wear out over time, causing a loss of suction. To check for this:

AD
  • Inspect the seal around the dirt reservoir.
  • If it looks worn or torn, you may need to replace it. Contact Dyson's customer service for assistance.

Regularly maintaining your Dyson Ball vacuum can extend its lifespan and keep it running smoothly. By staying proactive and addressing issues promptly, you can ensure that your vacuum remains a reliable partner in your cleaning adventures. Don't let minor setbacks keep you from enjoying the benefits of your powerful, easy-to-use Dyson device. Happy cleaning!

AD