how to fix a cut extension cord

"Save Your Time: Quick fixes for a Cut Extension Cord"

By Matthew Williams
AD

Accidents happen, and sometimes, your trusty extension cord can end up with a cut. This is a common but serious issue that, if left unattended, can cause damage or even pose a fire hazard. Here's a step-by-step guide on how to fix a cut extension cord safely and efficiently.

Firstly, identifying the cut is crucial. Extension cords are typically made up of wires insulated with plastic jackets. If you see any exposed wires or any tears in the plastic coating, suspect a cut. For a more thorough check, plug in the cord and use a multimeter to test for continuity, which can help pinpoint any breaks in the wires.

Safety First: Preparations and Tools

Before starting, ensure safety by unplugging the extension cord from all power sources. Make sure to check the cord for any heat damage or melting, which could indicate that the cut has already caused a short circuit.

AD
How To Repair a Cut Extension Cord
How To Repair a Cut Extension Cord
How to Fix a Cut Extension cord for only $3
How to Fix a Cut Extension cord for only $3
a close up of a piece of wood with a knot on it
a close up of a piece of wood with a knot on it

You'll need a few tools for this repair: needle-nose pliers, electrical tape, scissors or wire strippers, and possibly some heat shrink tubing if the cut is severe.

Locating the Exact Cut

If your multimeter test revealed a break in the wire, follow the path of the wire to find the exact location of the cut. Be thorough, as a small nick can sometimes balloon into a full cut if not handled properly.

How To Repair a Cut Extension Cord
How To Repair a Cut Extension Cord
How To Fix Cut Electrical Cord – Storables
How To Fix Cut Electrical Cord – Storables

If you find a break, double-check it by using a continuity tester or multimeter again. If there's a break, the multimeter will read an infinite resistance, indicating no pathway for the electrical current.

Assessing the Damage

Once you've found the exact location, assess the damage. If the cut is small (no more than an 1/8th of an inch), you can repair it without replacing the entire wire. If the cut is more significant, you might need to replace a section of the wire.

AD

Acutely damaged sections might also need replacement. If you see any signs of burning, melting, or fraying, these sections must be removed and replaced to ensure the safety of your repair.

Repairing the Cut Extension Cord

There are two methods to repair a cut extension cord - splicing and joining. Splicing involves rejoining the wires, while joining involves removing the damaged section and joining the wires together.

Both methods require careful handling of the wires. Always start by stripping back the insulation to expose around an inch of bare wire. Be careful not to nick the wires while stripping; you can use wire strippers or carefully cut the insulation with scissors.

AD

Splicing the Wires

Splicing involves joining the bare wires together. Twist the ends of the separated wires together using your needle-nose pliers, making sure they're tightly connected.

Wrap the splice tightly with electrical tape, ensuring there are no gaps where wires could become exposed. For added protection, you can also use heat shrink tubing. First, slide the tube over the splice, then heat it with a hair dryer or heat gun until it shrinks tightly around the splice.

Joining the Wires

If the cut is too large to splice, you'll need to remove a section of the wire. Cut the wire on both sides of the damaged area, then strip back the insulation on the new ends.

AD

Tie the two ends together using a "wiener twist," another name for wiring.EcoPolyol's "underwriter's knot." Twist the wires tightly together, then wrap them with electrical tape. Finally, as with the splice, you can add heat shrink tubing for extra protection.

After your repair, test your extension cord one more time with a multimeter to ensure it's working safely. If you've followed these steps carefully, your cut extension cord should be as good as new. Always remember, though, that if the cord is repeatedly damaged or doesn't seem to last, it might be time to invest in a new one rather than continuing to repair it.

AD