how to fix a cracked motorcycle fairing

How to Repair a Cracked Motorcycle Fairing

By William Wilson
AD

Imagine you're cruising along the open highway, the wind in your hair, and then suddenly—you hit a pothole or another rider clips your fairing. The once pristine surface is now marred by an unsightly crack. Don't worry, fixing a cracked motorcycle fairing is not an insurmountable task. With the right tools, knowledge, and a steady hand, you can repair it and be back on the road in no time. Let's dive into the step-by-step guide to fix that cracked fairing.

Before we begin, remember that safety is paramount. Always work in a well-lit, spacious area, and ensure your motorcycle is securely supported. Now, let's get started!

Preparation and Gathering Materials

Fixing a cracked fairing requires a few tools and materials. You can likely find everything you need at your local hardware or motorcycle supply store.

AD
BMW Fairing Plastic Repair with Plast-Aid
BMW Fairing Plastic Repair with Plast-Aid
How to fix motorcycle fairings.
How to fix motorcycle fairings.
Motorcycle Fairing Repair on abs plastic Part 1
Motorcycle Fairing Repair on abs plastic Part 1

The essential tools and materials include:

  • Epoxy or fibreglass repair kit
  • Sandpaper (120 and 220 grit)
  • Safety glasses
  • Masking tape
  • Razor blade or hobby knife
  • Cleaning agents (soap and water, rubbing alcohol, or acetone)
  • Cloths or rags
  • Gloves (for handling epoxy)
  • optional: Fairy dust or colour matching paint

Cleaning and Surface Preparation

Start by thoroughly cleaning the fairing to remove any dirt, grease, or debris. This ensures better adhesion of the repair material.

How To Repair Motorcycle Fairing - DIY Motorcycle DENTED Fairing Repair
How To Repair Motorcycle Fairing - DIY Motorcycle DENTED Fairing Repair
Plast-aid Plastic Repair Solution • Product Reviews • goldwingdocs.com
Plast-aid Plastic Repair Solution • Product Reviews • goldwingdocs.com

Use soap and water, rubbing alcohol, or acetone to clean the area. Allow it to dry completely. Then, use sandpaper to lightly sand the area around the crack. This roughens the surface, promoting better bonding of the repair material. Wipe off any dust generated by sanding.

Masketing and Preparing the Epoxy

Use masking tape to cover areas you don't want the epoxy to adhere to. Be precise to avoid epoxy residue that will be difficult to remove later.

AD

Prepare the epoxy according to the manufacturer's instructions, usually mixing two components in a specific ratio. Be efficient with your work as epoxy has a limited working time before it starts to cure.

Applying the Epoxy Repair

With the fairing clean and prepped, and the epoxy mixed, you're ready to make the repair.

Using a putty knife or your gloved fingers, apply the epoxy to fill the crack. Ensure the entire length is well-coated. Build up the epoxy gradually, allowing each layer to cure slightly before adding more. This helps prevent excessive shrinkage and ensures a strong repair. Remove any excess epoxy from the surface using a razor blade or hobby knife.

AD

Sanding and Shaping the Repair

Allow the epoxy to cure completely as per the manufacturer's instructions. Once cured, use 120 grit sandpaper to smooth out the repaired area. Be patient, and sand in the direction of the crack to avoid creating new ones.

Inspect your work so far. If the repaired area is still proud (raised above the surrounding surface), continue sanding with 220 grit sandpaper until it's flush with the surrounding fairing. Remember, you can't sand off epoxy, so it's better to add a little too much than not enough.

optional: Applying Fairy Dust or Paint

If your fairing has a textured finish, apply fairy dust to match the texture. If the repaired area needs painting to match the rest of the fairing, do so now. Allow the paint to cure completely before proceeding.

AD

Reinstalling the Fairing

Now that the repair is complete, it's time to reinstall the fairing. If you haven't already, remove any protective film from the fairing's surface. Ensure all mounting hardware is clean and in good condition.

Reinstall the fairing according to the manufacturer's instructions. Tighten all bolts to the specified torque. Reattach any panels or accessories you removed earlier.

There you have it! Your motorcycle fairing is as good as new, ready to protect you from the elements and road debris. Regularly inspect your fairing for any signs of stress or cracks, and perform maintenance as needed. Happy riding!

AD