how to fix a bad circuit breaker

How to Fix a Bad Circuit Breaker: Expert Guide

By Hannah Hernandez
AD

A circuit breaker playing up can leave you in the dark, both metaphorically and literally. If your home's electrical system keeps tripping, don't despair. Here's a comprehensive guide on how to fix a bad circuit breaker, ensuring your home is safe and powered consistently.

First, some safety pointers. Always switch off the main power supply before tinkering with the circuit breakers. Use a multimeter to verify there's no voltage before you proceed. Now, let's dive into the heart of the issue.

Identifying the Culprit

Circuit breakers can trip due to excess current, short circuits, or even age. So, the first task is to pinpoint the problematic breaker.

AD
Circuit Breaker Won’t Reset? | Try These Fixes
Circuit Breaker Won’t Reset? | Try These Fixes
Can Circuit Breakers Go Bad? How to Tell if a Circuit Breaker is Bad
Can Circuit Breakers Go Bad? How to Tell if a Circuit Breaker is Bad
How To Fix A Circuit Breaker
How To Fix A Circuit Breaker

Your panel should have a main breaker and several individual breakers for different circuits. Switch each breaker to the 'off' position, then one by one, turn them back on. When the breaker trips again, make a note of the switch's position. This should give you a heads-up on which circuit is causing the issue.

Checking for Physical Damage

Begin by inspecting the breaker that tripped. Does it feel unusually hot? This could indicate an overload or a short circuit. Check the wires connected to the breaker for any scorch marks or damage. Corroded or damaged wires should be replaced immediately.

How To Reset a Tripped Circuit Breaker Due To Electrical Overcurrents
How To Reset a Tripped Circuit Breaker Due To Electrical Overcurrents
Why Your Breaker Keeps Tripping (and What to Do)
Why Your Breaker Keeps Tripping (and What to Do)

If a breaker keeps tripping, even after being reset, it might be faulty. A bad breaker might have a unusual clicking sound, or its handle won't reset properly. This suggests it's time for a replacement.

Checking for Proper Wiring

Improper wiring can make a circuit breaker misbehave. Ensure the breaker is rated appropriately for the circuit it controls. Check that the black (hot) wire is connected to the breaker's brass terminal, and the white (neutral) wire to the neutral bus bar.

AD

If you're uncomfortable with inspecting the wires, it's best to call a licensed electrician. Electrical work can be dangerous, and it's better to be safe than sorry.

Testing the Circuit Breaker

Before deciding to replace a breaker, it's a good idea to test it to confirm it's the cause. First, ensure the breaker is off and won't reset.

Using a Multimeter to Test Resistance

Set your multimeter to the lowest ohms setting. Touch the probes to the breaker's terminals. A bad breaker will have very high resistance or be open (infinite resistance). If it reads very low resistance, the breaker might be stuck 'on'. Try toggling the breaker switch before testing again.

AD

If the resistance is within the acceptable range (around 1-5 ohms), the breaker might be working correctly. In this case, the problem might lie elsewhere in the circuit.

Using an continuity tester

Similar to a multimeter, but easier to use, a continuity tester can also help diagnose a bad breaker. Set it to 'beep' when continuity is found, then touch the probes to the breaker's terminals. If the breaker is good, the tester should beep.

If it doesn't, that suggests the breaker is faulty and needs replacing.

AD

Regularly inspecting and maintaining your circuit breakers can prevent many electrical issues. If you're unsure about any part of the process, always consult a professional. Imagine the relief of knowing your home's electrical system is safe and reliable, thanks to your newfound circuit breaker fixing skills.

AD