Live Edge Wood Finishing: Retain the Bark's Beauty
Live edge wood, characterized by its natural, unfinished edge, brings a rustic charm to any space. When it comes with bark still attached, it's like a piece of nature has been invited into your home. But to truly showcase your unique piece, you'll want to finish it properly. Here's a step-by-step guide on how to finish live edge wood with bark.
The first step is to understand that you're working with a natural material, so patience and respect are key. The bark's brittleness and the wood's unique shape can present challenges, but with the right techniques, you can create a stunning, durable finish.
Preparing Your Live Edge Wood
Before applying any finish, you need to prepare your wood. This involves cleaning, stabilizing, and sanding.
Start by removing any loose debris or dirt from the bark using a soft brush. Apply a wood conditioner to help seal the wood and prevent tannin bleed, which can make your finish look uneven. Use a soft cloth to apply the conditioner, ensuring it penetrates the wood grain.
Sanding the Wood
Next, you'll need to sand the wood to create a smooth surface for the finish. Start with coarse grit sandpaper (80-120 grit) to remove any sharp edges or imperfections. Be gentle around the bark to avoid damaging it.
Once you've sanded the wood, switch to a fine grit sandpaper (150-220 grit) to smooth out the surface. Wipe off the dust with a damp cloth, then let it dry completely before moving on to the next step.
Stabilizing the Wood
To prevent checking (cracks that form as the wood dries or ages), apply a wood stabilizer or a silicone-based sealant. These products penetrate the wood and create a durable, flexible barrier.
Use a paintbrush to apply the stabilizer, working it into the grain of the wood. Allow it to dry completely according to the manufacturer's instructions. Once dry, lightly sand the surface with a fine grit sandpaper to remove any residue.
Applying the Finish
Now that your wood is prepared, it's time to chose and apply your finish. The type of finish you choose will depend on the look you want to achieve and the level of protection you need.
For a natural, matte look, consider aklar, a blond, non-toxic, vegetable glue size made from potatoes. It penetrates deep into the wood, providing protection while enhancing its natural grain and color. For a more durable, glossy finish, consider a water-based or oil-based polyurethane.
Applying the Klar
If you've chosen to use klavar, begin by mixing it according to the manufacturer's instructions. Use a paintbrush to apply a generous coat, working it into the grain of the wood. Allow it to soak in for the recommended time (usually 15-30 minutes), then wipe off any excess with a clean, damp cloth.
Let the klar dry completely (this can take several days), then lightly sand the surface with a fine grit sandpaper. Wipe off the dust, then apply a second coat. Repeat this process until you've achieved the desired look and level of protection. Remember, patience is key for building up a strong, durable finish.
Applying the Polyurethane
For a more durable, glossy finish, polyurethane is a great choice. Begin by applying a thin, even coat using a paintbrush. Work with the grain of the wood, and be careful not to overapply, as this can cause the finish to drips and look uneven.
Allow the first coat to dry completely (usually 24 hours), then lightly sand the surface with a fine grit sandpaper. Wipe off the dust, then apply a second coat. Continue applying coats (allowing them to dry and sanding between each) until you've achieved the desired look and level of protection. Remember, building up layers is better than applying a thick, messy coat.
Once your final coat is dry, your live edge wood with bark is now protected and finished. With proper care, it will maintain its beauty for years to come. Enjoy your unique piece of nature in your home, and remember, each imperfection is a testament to its natural origins."