how to finish bead loom bracelet

Mastering the Finish: How to Complete Your Bead Loom Bracelet

By Richard Lewis
AD

Are you new to bead loom bracelets or have you been crafting them for a while but struggle to finish them perfectly? You're not alone. Finishing a bead loom bracelet can seem daunting, but with the right techniques and a bit of practice, you'll be turning out professional-looking bracelets in no time. Let's explore how to finish a bead loom bracelet in simple, step-by-step instructions.

Before we dive into the finishing process, let's ensure you have the necessary tools. You'll need your completed bead loom project, scissors, a tapestry needle, beading needle, jewelry pliers, clasp, stop bead, and a couple of jump rings. Once you've gathered your materials, let's begin.

Securing the Beads

At first glance, securing the beads on a bead loom bracelet seems tricky, but it's actually quite simple. The key is to keep your tension even and to be patient.

AD
Tip on How to Finish Loom Bracelets - The Beading Gem's Journal
Tip on How to Finish Loom Bracelets - The Beading Gem's Journal
Katie Dean – Transforming lives through creativity, story and design
Katie Dean – Transforming lives through creativity, story and design
Most tutorials show tying knots but I tried another way of finishing the beaded loom bracelet #diy
Most tutorials show tying knots but I tried another way of finishing the beaded loom bracelet #diy

First, insert your tapestry needle into the last bead on your loom. Pull the needle through the bead and then back out through the side of the first bead on your loom. This creates a simple, secure knot that will hold your beads in place.

Using a Stop Bead

To make your bracelet more secure and prevent it from fraying, it's a good idea to use a stop bead. A stop bead is a larger bead, often plastic or glass, that's too big to fit through the eye of your needle.

How to make a bead loom bracelet (Step-by-Step for Beginners)
How to make a bead loom bracelet (Step-by-Step for Beginners)
How to finish a loom bead bracelet #loombeading
How to finish a loom bead bracelet #loombeading

To use a stop bead, simply slide it onto the thread before you start your first knot. When you pull the needle through the last bead on your loom, the stop bead will stay on the wrong side of the loom, securing your beads in place.

Securing the Thread

After securing your beads with a knot and, optionally, a stop bead, you'll need to secure the thread. This is where the jewelry pliers come in handy.

AD

Hold the knot (and stop bead, if you used one) against the loom with your thumb. Using your pliers, carefully pull the thread tight and snip it close to the knot. The pliers will help you keep tension on the thread while you snip, ensuring that your bracelet stays secure.

Attaching the Clasp

Now that your beads are secure, it's time to attach the clasp. This is what will make your bracelet wearable. There are many types of clasps, but we'll focus on the most common: the lobster clasp.

To attach a lobster clasp, you'll need jump rings. Jump rings are small, circular pieces of wire that can be opened and closed with jewelry pliers. They allow you to connect the ends of your bracelet to the clasp.

AD

Opening and Closing Jump Rings

Before you can attach the jump rings to your bracelet, you need to know how to open and close them. With your pliers, grab the ring on each side of the jump ring and press the handles together. The ring should pop open.

To close the jump rings, put the two ends back together and press the handles of your pliers to squeeze the ends closed. Be careful not to overtighten, as this can cause the jump ring to bend and make it harder to open in the future.

Attaching the Jump Rings to the Bracelet

With your jump rings open, carefully thread one onto each end of your bracelet. Once they're on, use your pliers to close the jump rings. Make sure they're closed tightly enough that your bracelet won't slip through, but not so tight that you can't open them again if you need to.

AD

Now, take your clasp and your jump rings. Insert one end of the clasp bar into one of the jump rings and close the ring around the bar. Do the same with the other end of the clasp bar and the second jump ring. Your bracelet is now ready to wear!

Congratulations! You've successfully finished your bead loom bracelet. Wear it with pride, or perhaps give it as a gift to someone special. The joy of crafting is in the process, but the satisfaction is in the finished product. Happy creating!

AD